Page 7 of 16
  • GOST R IEC 60745-2-6-2007 Hand-held motor-operated electric tools. Safety and test methods. Part 2-6. Particular requirements for hammers and rotary hammers
  • GOST R IEC 60745-2-5-2007 Hand-held motor-operated electric tools. Safety and test methods. Part 2-5. Particular requirements for circular saws
  • GOST R IEC 60580-2006 Medical electrical equipment. Dose area product meters
  • GOST R IEC 61084-2-4-2007 Cable trunking and ducting systems for electrical installations. Part 2. Particular requirements. Section 4. Service poles
  • GOST R IEC 61084-2-2-2007 Cable trunking and ducting systems for electrical installations. Part 2-2. Particular requirements. Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations
  • GOST R IEC 61084-2-1-2007 Cable trunking and ducting systems for electrical installations. Part 2. Particular requirements. Section 1. Cable trunking and ducting systems intended for mounting on walls or ceilings
  • GOST R IEC 61084-1-2007 Cable trunking and ducting systems for electrical installations. Part 1. General requirements
  • GOST R IEC 60811-1-3-2007 Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-3. General application methods. Methods for determining the density. Water absorption tests. Shrinkage test
  • GOST R IEC 60332-2-1-2007 Tests on electric and optical fibre cables under fire conditions. Part 2-1. Test for vertical flame propagation for a single small insulated wire or cable. Apparatus
  • GOST R IEC 60332-2-2-2007 Tests on electric and optical fibre cables under fire conditions. Part 2-2. Test for vertical flame propagation for a single small insulated wire or cable. Procedure for diffusion flame
  • GOST R IEC 60332-1-3-2007 Tests on electric and optical fibre cables under fire conditions. Part 1-3. Test for vertical flame propagation for a single insulated wire or cable. Procedure for determination of flaming droplets/particles
  • GOST R IEC 60332-1-2-2007 Tests on electric and optical fibre cables under fire conditions. Part 1-2. Test for vertical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame
  • GOST R IEC 60332-1-1-2007 Tests on electric and optical fibre cables under fire conditions. Part 1-1. Test for vertical flame propagation for a single insulated wire or cable. Apparatus
  • GOST R IEC 60331-31-2007 Tests for electric cables under fire conditions. Circuit integrity. Part 31. Procedures and requirements for fire with shock. Cables of rated voltage up to and including 0,6/1,0 kV
  • GOST R IEC 60331-12-2007 Tests for electric cables under fire conditions. Circuit integrity. Part 12. Apparatus. Fire with shock at a temperature of at least 830 °C
  • GOST R ISO/IEC 15459-4-2007 Automatic identification. International unique identifiers. Part 4. Unique identifiers of individual items for supply chain management
  • GOST R ISO/IEC 15459-3-2007 Automatic identification. International unique identifiers. Part 3. Common rules for unique identifiers
  • GOST R ISO/IEC 27001-2006 Information technology. Security techniques. Information security management systems. Requirements
  • GOST R ISO/IEC 17030-2007 General requirements for third party marks of conformity
  • GOST R IEC 60269-4-1-2007 Low-voltage fuses. Part 4-1. Supplementary requirements for fuse-links for the protection of semiconductor devices. Sections I to III. Examples of types of standardized fuse-links
  • GOST R IEC 60127-4-2007 Miniature fuses. Part 4. Universal modular fuse-links for through-hole and surfase mount types
  • GOST R ISO/IEC 15434-2007 Automatic identification. Syntax for high-capacity automatic data capture media
  • GOST R IEC 61241-0-2007 Electrical apparatus for use in the presence of combustible dust. Part 0. General requirements
  • GOST R IEC 61241-10-2007 Electrical apparatus for use in the presence of combustible dust. Part 10. Classification of areas where combustible dusts are or may be present
  • GOST R IEC 60601-1-6-2007 Medical electrical equipment. Part 1-6. General requirements for safety. Usability
  • GOST R ISO/IEC 11694-4-2006 Identification cards. Optical memory cards. Linear recording method. Part 4. Logical data structures
  • GOST R ISO/IEC 15457-3-2006 Identification cards. Thin flexible cards. Part 3. Test methods
  • GOST R ISO/IEC 15457-1-2006 Identification cards. Thin flexible cards. Part 1. Physical characteristics
  • GOST IEC 60641-2-2006 Pressboard and presspaper for electrical purposes. Part 2. Methods of tests
  • GOST R IEC 60297-3-103-2006 Mechanical structures for radio-electronic equipment. Keying and alignment pin. Dimensions of mechanical structures of the 482,6 mm (19 in) series
  • GOST R IEC 60297-3-102-2006 Mechanical structures for radio-electronic equipment. Injector/extractor handle. Dimensions of mechanical structures of the 482,6 mm (19 in) series
  • GOST R IEC 60297-3-101-2006 Mechanical structures for radio-electronic equipment. Subracks and associated plug-in units. Dimensions of mechanical structures of the 482,6 mm (19 in) series
  • GOST R IEC 60745-2-1-2006 Hand-held motor-operated electric tools. Safety and test methods. Part 2-1. Particular requirements for drills and impact drill machines
  • GOST R ISO/IEC 7810-2006 Identification cards. Physical characteristics
  • GOST R ISO/IEC 7816-3-2006 Information technology. Identification cards. Integrated circuit(s) cards with contacts. Part 3. Electronic signals and transmission protocols
  • GOST R ISO/IEC 10536-1-2006 Identification cards. Contactless integrated circuit(s) cards. Close-coupled cards. Part 1. Physical characteristics
  • GOST R IEC 60601-2-7-2006 Medical electrical equipment. Part 2-7. Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators
  • GOST R IEC 61676-2006 Medical electrical equipment. Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
  • GOST R IEC 62220-1-2006 Medical electrical equipment. Characteristics of digital X-ray imaging devices. Part 1. Determination of the detective quantum efficiency
  • GOST R IEC 60601-2-2-2006 Medical electrical equipment. Part 2. Particular requirements for the safety of high frequency surgical equipment
  • GOST R ISO/IEC TR 13335-5-2006 Information technology. Security techniques. Part 5. Management quidance on network security
  • GOST R ISO/IEC 13335-1-2006 Information technology. Security techniques. Part 1. Concepts and models for information and communications technology security management
  • GOST R IEC 60050-426-2006 International electrotechnical vocabulary. Chapter 426. Electric equipment for explosive atmospheres
  • GOST R IEC 60898-2-2006 Circuit-breakers for overcurrent protection for household and similar installations. Part 2. Circuit-breakers for a.c. and d.c. operation
  • GOST R ISO/IEC 19794-6-2006 Automatic identification. Biometrics. Biometric data interchange formats. Part 6. Iris image data
  • GOST R IEC 61675-3-2006 Radionuclide imaging devices. Characteristics and test conditions. Part 3. Gamma camera based wholebody imaging systems
  • GOST R IEC 61675-1-2006 Radionuclide imaging devices. Characteristics and test conditions. Part 1. Positron emission tomographs
  • GOST R IEC 61675-2-2006 Radionuclide imaging devices. Characteristics and test conditions. Part 2. Single photon emission computed tomographs