GOST R certification - similar to IEC

To conform with the following Russian standards the manufacturer should be in compliance with the corresponding IEC standards. All these GOST R standards are based on the IEC.

The list of all GOST R standards similar to IEC could be downloaded here.

List of the standards which will be used in Customs Union Technical Regulation for low voltage devices can be downloaded here (in Russian).

  • GOST R ISO/IEC 17040-2010 Conformity assessment. General requirements for peer assessment of conformity assessment bodies and accreditation bodies
  • GOST R ISO/IEC 27004-2011 Information technology. Security techniques. Information security management. Measurement
  • GOST R ISO/IEC 11179-1-2010 Information technology. Metadata registries (MDR). Part 1. Framework
  • GOST R IEC 60079-0-2011 Explosive atmospheres. Part 0. Equipment. General requirements
  • GOST R IEC 62485-2-2011 Secondary batteries and battery installations. Safety requirements. Part 2. Stationary batteries
  • GOST R IEC 60318-5-2010 Electroacoustics. Simulators of human head and ear. Part 5. 2 cm3 coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts
  • GOST R IEC 60118-8-2010 Electroacoustics. Hearing aids. Part 8. Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions
  • GOST R ISO/IEC 27033-1-2011 Information technology. Security techniques. Network security. Part 1. Overview and concepts
  • GOST R IEC 62087-2011 Methods of measurement for the power consumption of audio, video and related equipment
  • GOST R ISO/IEC 24713-2-2011 Information technology. Biometrics. Biometric profiles for interoperability and data interchange. Part 2. Physical access control for employees at airports
  • GOST R ISO/IEC 19762-2-2011 Information technology. Automatic identification and data capture techniques (AIDC). Harmonized vocabulary. Part 2. Optically readable media (ORM)
  • GOST R IEC 60695-2-10-2011 Fire hazard testing. Part 2-10. Glowing/hot-wire based test methods. Glow-wire apparatus and common test procedures
  • GOST R IEC 62075-2011 Audio/video, information and communication technology equipment. Environmentally conscious design
  • GOST R IEC 61309-2011 Deep-fat fryers for household use. Methods for measuring the performance
  • GOST R ISO/IEC 19762-3-2011 Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary. Part 3. Radio frequency identification (RFID)
  • GOST R ISO/IEC 19762-4-2011 Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary. Part 4. General terms relating to radio communications
  • GOST R IEC/ТС 60034-17-2009 Rotating electrical machines. Part 17. Application guide for cage induction motors when fed from converters
  • GOST R ISO/IEC 9834-8-2011 Information technology. Open systems interconnection. Procedures for the operation of OSI registration authoritiers. Part 8. Generation and registration of universally unique identifiers (UUIDs) and their use as ASN.1 object identifier components
  • GOST R ISO/IEC 9834-9-2011 Information technology. Open systems interconnection. Procedures for the operation of OSI registration authoritiers. Part 9. Registration of object identifier arcs for applications and services using tagbased identification
  • GOST R IEC 60695-2-2-2011 Fire hazard testing. Part 2. Test methods. Section 2. Needle-flame test
  • GOST ISO/IEC 17025-2009 General requirements for the competence of testing and calibration laboratories
  • GOST R IEC 60789-2010 Characteristics and test conditions of radionuclide imaging devices. Anger type gamma cameras
  • GOST R ISO/IEC 12207-2010 Information technology. System and software engineering. Software life cycle processes
  • GOST R IEC 62220-1-2-2010 Medical electrical equipment. Characteristics of digital X-ray imaging devices. Part 1-2. Determination of the detective quantum efficiency. Detectors used in mammography
  • GOST R IEC 60336-2010 X-ray tube assemblies for medical diagnosis. Сharacteristics of focal spots
  • GOST R IEC 60601-2-17-2010 Medical electrical equipment. Part 2-17. Particular requirements for the safety of automatically-controlled brachytherapy aferloading equipment
  • GOST R IEC 60079-0-2007 Explosive atmospheres. Part 0. Equipment. General requirements
  • GOST R IEC 60705-2011 Household microwave ovens. Methods for measuring performance
  • GOST R IEC 60079-33-2011 Explosive atmospheres. Part 33. Equipment protection by special protection «s»
  • GOST R IEC 62018-2011 Power consumption of information technology equipment. Measurement methods
  • GOST R IEC 60085-2011 Electrical insulation. Thermal evaluation and designation
  • GOST R IEC 62301-2011 Household electrical appliances. Measurement of standby power
  • GOST R IEC 60332-3-10-2011 Tests on electric and optical cables under fire conditions. Part 3-10. Flame spread of vertically-mounted bunched wires or cables. Apparatus
  • GOST R IEC 60332-3-10-2005 Tests on electric and optical cables under fire conditions. Part 3-10. Flame spread of vertically-mounted bunched wires or cables. Apparatus
  • GOST R ISO/IEC 7811-9-2011 Identification cards. Recording technique. Part 9. Tactile identifier
  • GOST R ISO/IEC 7811-8-2011 Identification cards. Recording technique. Part 8. Magnetic stripe of coercivity of 51,7 kA/m (650 Oe)
  • GOST R ISO/IEC 19762-1-2011 Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary. Part 1. General terms relating to AIDC
  • GOST R ISO/IEC 31010-2011 Risk management. Guide of risk assessment
  • GOST R ISO/IEC 17040-2010 Conformity assessment. General requirements for peer assessment of conformity assessment bodies and accreditation bodies
  • GOST R ISO/IEC 17020-2010 General criteria for the operation of various types of bodies performing inspection
  • GOST R ISO/IEC 19778-1-2011 Information technology. Learning, education and training. Collaborative technology. Collaborative workplace. Part 1. Collaborative workplace data model
  • GOST R IEC 60950-23-2011 Information technology equipment. Safety. Part 23. Large data storage equipment
  • GOST R IEC 61557-4-2007 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 4. Resistance of earth connection and equipotential bonding
  • GOST R IEC 60079-19-2011 Explosive atmospheres. Part 19. Equipment repair, overhaul and reclamation
  • GOST R IEC 60079-11-2010 Explosive atmospheres. Part 11. Intrinsic safety circuit «i»
  • GOST R ISO/IEC 19794-5-2006 Automatic identification. Biometrics. Biometric data interchange formats. Part 5. Face image data
  • GOST R IEC 61982-1-2011 Secondary batteries for the propulsion of electric road vehicles. Part 1. Test parameters
  • GOST R IEC/TR 61948-1-2009 Nuclear medicine instrumentation. Routine tests. Part 1. Radiation counting systems
  • GOST R IEC 62127-2-2009 State system for ensuring the uniformity of measurements. Hydrophones. General requirements for calibration methods in the frequency range up 40 MHz
  • GOST R IEC 62040-1-1-2009 Uninterruptible power systems (UPS). Part 1-1. General and safety requirements for UPS used in operator access areas
  • GOST R IEC 61996-1-2009 Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR). Part 1. Voyage data recorder (VDR). Technical and performance requirements, methods of testing and required test results

  • GOST R IEC 61850-7-2-2009 Communication networks and systems in substations. Part 7. Basic communication structure for substation and feeder equipment. Section 2. Abstract communication service interface (ACSI)
  • GOST R IEC 61850-7-1-2009 Communication networks and systems in substations. Part 7. Basic communication structure for substation and feeder equipment. Section 1. Principles and models
  • GOST R IEC 61207-2-2009 Gas analyzers. Expression of performance. Part 2. Measurement of oxygen concentration in gas (utilizing high-temperature electrochemical sensors)
  • GOST R IEC 61207-1-2009 Gas analyzers. Expression of performance. Part 1. General
  • GOST R IEC 61174-2009 Maritime navigation and radiocommunication equipment and systems. Electronic chart display and information system (ECDIS). Operational and performance requirements, methods of testing and required test results
  • GOST R IEC 60950-1-2009 Information technology equipment. Safety. Part 1. General requirements
  • GOST R IEC 60942-2009 Sound calibrators. Specifications and test requirements
  • GOST R IEC 60825-2-2009 Safety of laser products. Part 2. Safety of optical fibre communication systems
  • GOST R IEC/TR 60825-9-2009 Safety of laser products. Part 9. Compilation of maximum permissible exposure to incoherent optical radiation
  • GOST R IEC 60745-2-8-2009 Hand-held motor-operated electric tools. Safety and test methods. Part 2-8. Particular requirements for sheet metal shears
  • GOST R IEC 60745-1-2009 Hand-held motor-operated electric tools. Safety and test methods. Part 1. General requirements
  • GOST R IEC 60601-2-33-2009 Medical electrical equipment. Part 2-33. Particular requirements for the safety of magnetic resonance equipment for medical diagnosis
  • GOST R IEC 60086-4-2009 Primary batteries. Part 4. Safety of lithium batteries
  • GOST R IEC 60065-2009 Audio, video and similar electronic apparatus. Safety requirements
  • GOST R IEC 60034-12-2009 Rotating electrical machines. Part 12. Starting performance of single-speed three-phase cage induction motors
  • GOST R ISO/IEC 19794-8-2009 Automatic identification. Biometric identification. Biometric data interchange formats. Part 8. Finger pattern skeletal data
  • GOST R ISO/IEC 19794-3-2009 Automatic identification. Biometric identification. Biometric data interchange formats. Part 3. Finger pattern spectral dаta
  • GOST R ISO/IEC 8825-4-2009 Information technology. АСН.1 encoding rules. Part 4. XML encoding rules (XER)
  • GOST R IEC 60050-826-2009 Electrical installations. Terms and definitions
  • GOST R ISO/IEC 17000-2009 Conformity assessment. Vocabulary and general principles
  • GOST R IEC 60601-2-22-2008 Medical electrical equipment. Part 2-22: Particular requirements for the basic safety and essential performance of surgical, cosmetic, therapeutic and laser equipment
  • GOST R ISO/IEC 9834-2-2009 Information technology. Open systems interconnection. Procedures for the operation of OSI registration authoritiers. Part 2. Registration procedures for OSI document types
  • GOST R ISO/IEC 17007-2011 Conformity assessment. Guidance for drafting normative documents suitable for conformity assessment
  • GOST R ISO/IEC 17024-2011 Conformity assessment. General requirements for bodies operating certification of persons
  • GOST R IEC 60745-2-17-2010 Hand-held motor-operated electric tools. Safety and test methods. Part 2-17. Particular requirements for routers and trimmers
  • GOST R IEC 61513-2011 Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
  • GOST R IEC 60709-2011 Nuclear power plants. Instrumentation and control systems important for safety. Separation
  • GOST R IEC 61225-2011 Nuclear power plants. Instrumentation and control systems important for safety. Requirements for electrical supplies
  • GOST R IEC 61226-2011 Nuclear power plants. Instrumentation and control systems important for safety. Classification of instrumentation and control functions
  • GOST R IEC 60880-2010 Nuclear power plants. Instrumentation and control systems important to safety. Software aspects for computer-based systemsperforming category A functions
  • GOST R IEC 60745-2-9-2010 Hand-held motor-operated electric tools. Safety and test methods. Part 2-9. Particular requirements for tappers
  • GOST R IEC 60079-13-2010 Explosive atmospheres. Part 13. Equipment protected by pressurized rooms «p»
  • GOST R IEC 62138-2010 Nuclear power plants. Instrumentation and control important for safety. Software aspects for computer-based systems performing category B or C functions
  • GOST R IEC 60745-2-2-2010 Hand-held motor-operated electric tools. Safety and test methods. Part 2-2. Particular requirements for screwdrivers and impact wrenches
  • GOST R IEC 60793-1-31-2010 Optical fibres. Part 1-31. Measurement methods and test procedures. Tensile strength
  • GOST R IEC 60793-1-30-2010 Optical fibres. Part 1-30. Measurement methods and test procedures. Fibre proof test
  • GOST R ISO/IEC 15963-2011 Information technology. Radio frequency identification for item management. Unique identification for RF tags
  • GOST R IEC 60990-2010 Metods of measurement of touch current and protective conductor current
  • GOST R IEC 60793-1-32-2010 Optical fibres. Part 1-32. Measurement methods and test procedures. Coating strippability
  • GOST R IEC 60079-31-2010 Explosive atmospheres. Part 31. Equipment dust ignition protection by enclosure «t»
  • GOST R IEC 60079-15-2010 Explosive atmospheres. Part 15. Equipment protection by type of protection «n»
  • GOST R IEC 60269-1-2010 Low-voltage fuses. Part 1. General requirements
  • GOST R IEC 60079-35-1-2011 Caplights for use in mines susceptible to firedamp. Part 1. General requirements and testing in relation to the risk of explosion
  • GOST R IEC 61643-12-2011 Low-voltage surge protective devices. Part 12. Surge protective devices connected to low-voltage power distribution systems. Selection and application principles
  • GOST R IEC 61557-2-2005 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 2. Insulation resistance
  • GOST R IEC 61557-3-2006 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance
  • GOST R IEC 60601-1-2010 Medical electrical equipment. Part 1. General requirements for basic safety and essential performance
  • GOST R IEC 62305-1-2010 Risk management. Protection against lightning. Part 1. General principles
  • GOST R IEC 60335-2-60-2000 Safety of household and similar electrical appliances. Particular requirements for whirlpool baths and test methods
  • GOST R IEC 61391-1-2011 Medical ultrasonic diagnostic equipment. General requirements to calibration methods for distance measurement systems

  • GOST R IEC 60227-6-2010 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 6. Lift cables and cables for flexible connections
  • GOST R IEC 60254-2-2009 Lead-acid traction batteries. Part 2. Dimensions of cells and terminals and marking of polarity on cells
  • GOST R IEC 61108-2-2010 Maritime navigation and radio communication equipment and systems. Global navigation satellite systems (GNSS). Part 2. Global navigation satellite system GLONASS. Receiver equipment. Performance standards. Methods of testing and required test results
  • GOST R IEC 62305-2-2010 Risk management. Protection against lightning. Part 2. Risk assessment
  • GOST R ISO/IEC 27005-2010 Information technology. Security techniques. Information security risk management
  • GOST R IEC 60044-7-2010 Instrument transformers. Part 7. Electronic voltage transformers
  • GOST R ISO/IEC 19795-4-2011 Information technology. Biometrics. Biometric performance testing and reporting. Part 4. Interoperability performance testing
  • GOST R IEC 60086-1-2010 Primary batteries. Part 1. General
  • GOST R IEC 60436-2011 Electric dishwashers for household use. Methods for measuring the performance
  • GOST R IEC 60079-20-1-2011 Explosive atmospheres. Part 20-1. Material characteristics for gas and vapour. Classification. Test methods and data
  • GOST R IEC 62359-2011 Medical equipment. General requirements to methods for determination of mechanical and thermal fields safe indices for medical ultrasonic diagnostic equipment
  • GOST R IEC 62552-2011 Household refrigerating appliances. Characteristics and test methods
  • GOST R IEC/TR 60788-2009 Medical electrical equipment. Glossary
  • GOST R IEC/TR 60977-2009 Medical electrical equipment. Medical electron accelerators in the range 1 MeV to 50 MeV. Guidelines for functional performance characteristics
  • GOST R IEC/TR 62266-2009 Medical electrical equipment. Guidelines for implementation of DICOM in radiotherapy
  • GOST R IEC 61192-3-2010 Soldered electronic assemblies. Workmanship requirements. Part 3. Through-hole mount assemblies
  • GOST R IEC 61192-1-2010 Soldered electronic assemblies. Workmanship requirements. Part 1. General technical requirements
  • GOST R IEC 61192-2-2010 Soldered electronic assemblies.Workmanship requirements. Part 2. Surface-mount assemblies
  • GOST R IEC 61850-7-3-2009 Communication networks and systems in substations. Part 7. Basic communication structure for substation and feeder equipment. Section 3. Common data clаsses
  • GOST R IEC 60901-2011 Single-capped fluorescent lamps. Performance requirements
  • GOST R IEC 61192-4-2010 Soldered electronic assemblies. Workmanship requirements. Part 4. Terminal assemblies
  • GOST R IEC 61192-5-2010 Soldered electronic assemblies. Workmanship requirements. Part 5. Rework, modification and repair
  • GOST R IEC 61191-1-2010 Printed boards assemblies. Part 1. Surface mount and related assembly technologies. General technical requirements
  • GOST R IEC 60095-2-2010 Lead-acid starter batteries. Part 2. Dimensions of batteries and dimensions and marking of terminals
  • GOST R IEC 62067-2011 Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV). Test methods and requirements
  • GOST R IEC 60287-3-3-2011 Electric cables. Calculation of the current rating. Part 3-3. Sections on operating conditions. Cables crossing external heat sources
  • GOST R IEC 60287-3-2-2011 Electric cables. Calculation of the current rating. Part 3-2. Sections on operating conditions. Economic optimization of power cable size
  • GOST R IEC 60350-2011 Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring the performance
  • GOST R IEC 60840-2011 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV). Test methods and requirements
  • GOST R IEC 61347-2-3-2011 Lamp controlgear. Part 2-3. Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
  • GOST R IEC 60695-2-11-2010 Fire hazard testing. Part 2-11. Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products
  • GOST R ISO/IEC 21827-2010 Information technology. Security techniques. Systems security engineering. Capability maturity model (SSE-CMM)
  • GOST R IEC 60695-10-2-2010 Fire hazard testing. Part 10-2. Abnormal heat. Ball pressure test
  • GOST R IEC 60622-2010 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-cadmium prismatic rechargeable single cell
  • GOST R IEC 60192-2011 Low-pressure sodium vapour lamps. Performance requirements
  • GOST R IEC 61191-2-2010 Printed boards assemblies. Part 2. Surface mount. Technical requirements
  • GOST R IEC 61191-4-2010 Printed boards assemblies. Part 4. Terminal mouting. Technical requirements
  • GOST R ISO/IEC 19784-2-2010 Automatic identification. Biometric identification. Biometric application. Programming interface. Part 2. Biometric archive function provider interface
  • GOST R IEC 61674-2006 Medical electrical equipment. Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging
  • GOST R IEC 60095-4-2010 Lead-acid starter batteries. Part 4. Dimensions of batteries for heavy vehicles
  • GOST R ISO/IEC 19794-10-2010 Automatic identification. Biometric identification. Biometric data interchange formats. Part 10. Hand geometry silhouette data
  • GOST R IEC 60127-2-2010 Miniature fuses. Part 2. Cartridge fuse links
  • GOST R ISO/IEC 7811-7-2010 Identification cards. Recording technique. Part 7. Magnetic stripe of high coercivity. High recording density
  • GOST R ISO/IEC 7811-6-2010 Identification cards. Recording technique. Part 6. Magnetic stripe of high coercivity
  • GOST R ISO/IEC 10373-1-2010 Identification cards. Test methods. Part 1. General characteristics
  • GOST R IEC 60079-17-2010 Explosive atmospheres. Part 17. Electrical installations inspection and maintenance
  • GOST R IEC 60127-3-2010 Miniature fuses. Part 3. Sub-miniature fuse links
  • GOST R IEC 61850-6-2009 Communication networks and systems in substations. Part 6. Configuration description language for communication in electrical substations related to IEDs
  • GOST R IEC 60332-3-25-2005 Tests on electric and optical cables under fire conditions. Рart 3-25. Flame spread of vertically-mounted bunched wires or cables. Category D
  • GOST R IEC 60332-3-24-2005 Tests on electric and optical cables under fire conditions. Part 3-24. Flame spread of vertically-mounted bunched wires or cables. Category C
  • GOST R IEC 60332-3-23-2005 Tests on electric and optical cables under fire conditions. Рart 3-23. Flame spread of vertically-mounted bunched wires or cables. Category B
  • GOST R IEC 60332-3-22-2005 Tests on electric and optical cables under fire conditions. Рart 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
  • GOST R IEC 61191-3-2010 Printed boards assemblies. Part 3. Sectional specification. Requirements for through-hole mount soldered assemblies

  • GOST R ISO/IEC 11694-1-2010 Identification cards. Optical memory cards. Linear recording method. Part 1. Physical characteristics
  • GOST R ISO/IEC 20000-1-2010 Information technology. Service management. Part 1. Specification
  • GOST R ISO/IEC 15457-2-2010 Identification cards. Thin flexible cards. Part 2. Magnetic recording techniques
  • GOST R ISO/IEC 11693-2010 Identification cards. Optical memory cards. General characteristics
  • GOST R ISO/IEC 7816-1-2010 Identification cards. Integrated circuit(s) cards with contacts. Part 1. Physical characteristics
  • GOST R ISO/IEC 10373-5-2010 Identification cards. Test methods. Part 5. Optical memory cards
  • GOST R ISO/IEC 7811-1-2010 Identification cards. Recording technique. Part 1. Embossing
  • GOST R ISO/IEC 24778-2010 Information technology. Automatic identification and data capture techniques. Aztec Code bar code symbology specification
  • GOST R ISO/IEC 7816-2-2010 Identification cards. Integrated circuit cards. Part 2. Сards with contacts. Dimensions and location of the contacts
  • GOST R ISO/IEC 11694-2-2010 Identification cards. Optical memory cards. Linear recording method. Part 2. Dimensions and location of the accessible optical area
  • GOST R ISO/IEC 10373-2-2010 Identification cards. Test methods. Part 2. Cards with magnetic stripes
  • GOST R IEC 60598-2-13-2010 Luminaries. Part 2-13. Particular requirements. Ground recesses luminaries
  • GOST R IEC 61207-6-2010 Gas analyzers. Expression of performance. Part 6. Photometric gas analyzers
  • GOST R IEC 60598-2-11-2010 Luminaries. Part 2-11. Particular requirements. Aquarium luminaries
  • GOST R ISO/IEC 20000-2-2010 Information technology. Service management. Part 2. Code of practice
  • GOST R IEC 60079-10-2-2010 Explosive atmospheres. Part 10-2. Classification of areas. Combustible dust atmospheres
  • GOST R IEC 60297-3-104-2009 Mechanical structures for electronic equipment. Connector dependent interface dimensions of subracks and plug-in units. Dimensions of mechanical structures of the 482,6 mm (19 in) series
  • GOST R ISO/IEC 26300-2010 Information technology. Open Document Format for Office Applications (OpenDocument) v1.0
  • GOST R IEC 60917-2-3-2009 Mechanical structures for electronic equipment practices. Interface co-ordination dimensions for the 25 mm equipment practice. Dimensions for subracks, chassis, backplanes, front panels and plug-in units
  • GOST R IEC 60825-12-2009 Safety of laser products. Part 12. Safety of free space optical communication systems used for transmission of information
  • GOST R IEC 60601-2-37-2009 Medical electrical equipment. Part 2-37. Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
  • GOST R IEC 60730-1-2002 Automatic electrical controls for household and similar use. General requirements and test methods
  • GOST R IEC 60034-2-1-2009 Rotating electrical machines. Part 2-1. Standart methods for determining losses and efficiency from tests (excluding mashines for traction vehicles)
  • GOST R ISO/IEC 18045-2008 Information technology. Security techniques. Methodology for IT security evaluation
  • GOST R IEC 61121-2011 Tumble dryers for household use. Methods for measuring the performance
  • GOST R ISO/IEC 24709-1-2009 Automatic identification. Biometric identification. Conformance testing for the biometric application programing interface (BioAPI). Part 1. Methods and procedures
  • GOST R IEC 60086-5-2009 Primary batteries. Part 5. Safety of batteries with aqueous electrolyte
  • GOST R IEC 62040-1-2-2009 Uninterruptible power systems (UPS). Part 1-2. General and safety requirements for UPS used in restricted access locations
  • GOST R IEC 61557-7-2009 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 7. Phase sequence
  • GOST R IEC 60825-1-2009 Safety of laser products. Part 1. Equipment clаssification, requirements and user's quide
  • GOST ISO/IEC 17011-2009 Conformity assessment. General requirements for accreditation bodies. Accrediting conformity assessment bodies
  • GOST R IEC 60079-2-2009 Explosive atmospheres. Part 2. Equipment protection by pressurized enclosure "p"
  • GOST R IEC 61161-2009 State system for ensuring the uniformity of measurements. Ultrasonic power in liquids. General requirements to measuring methods in the frequency range 0,5 to 25 MHz
  • GOST R IEC 60950-22-2009 Information technology equipment. Safety. Part 22. Equipment to be installed outdoors
  • GOST R IEC 60079-30-2-2009 Explosive atmospheres. Electrical resistance trace heating. Part 30-2. Application guide for design, installation and maintenance
  • GOST R IEC 60068-2-10-2009 Environmental testing. Part 2-10. Tests. Test J and guidance: Mould growth
  • GOST R IEC 60068-2-2-2009 Environmental testing. Part 2-2. Tests. Test B: Dry heat
  • GOST R IEC 60068-2-1-2009 Environmental testing. Part 2-1.Tests. Test A: Cold
  • GOST R IEC 60068-2-30-2009 Environmental testing. Part 2-30. Tests. Test Db: Damp heat, cyclic (12 h + 12 h cycle)
  • GOST R IEC 60068-2-78-2009 Environmental testing. Part-2-78. Tests. Test Cab: Damp heat, steady state
  • GOST R IEC 62127-1-2009 State system for ensuring the uniformity of measurements. Parameters of ultrasonic fields. General requirements to measuring methods and characterization of fields in the frequency range 0,5 to 40 MHz
  • GOST R IEC 60122-1-2009 Quartz crystal units of assessed quality. Part 1. Generic specification
  • GOST R ISO/IEC 15504-3-2009 Information technology. Process assessment. Part 3. Guidance to performing an assessments
  • GOST R IEC 60601-2-1-2009 Medical electrical equipment. Part 2-1. Particular requirements for the safety of electron accelerators in the range 1 MeV to 50 MeV
  • GOST R ISO/IEC 27006-2008 Information technology. Security techniques. Requirements for bodies providing audit and certification of information security management systems
  • GOST R ISO/IEC TR 19791-2008 Information technology. Security techniques. Security assessment of operational systems
  • GOST R ISO/IEC 15504-2-2009 Information technology. Process assessment. Part 2. Performing an assessment
  • GOST R ISO/IEC 17050-1-2009 Conformity assessment. Supplier's declaration of conformity. Part 1. General requirements
  • GOST R ISO/IEC 17050-2-2009 Conformity assessment. Supplier's declaration of conformity. Part 2. Supporting documentation
  • GOST R IEC 61241-17-2009 Electrical apparatus for use in the presence of combustible dust. Part 17. Inspection and maintenance of electrical installations in hazardous areas (other than mines)

  • GOST R IEC 61241-18-2009 Еlectrical apparatus for use in the presence of combustible dust. Part 18. Protection by encapsulation «mD»
  • GOST R ISO/IEC 15459-6-2009 Automatic identification. Unique identifiers. Part 6. Unique identifiers for product groupings
  • GOST R IEC 60079-30-1-2009 Explosive atmospheres. Electrical resistance trace heating. Part 30-1. General technical requirements and test methods
  • GOST R IEC 61241-11-2009 Electrical apparatus for use in the presence of combustible dust. Part 11. Protection by intrinsic safety «iD»
  • GOST R ISO/IEC 15504-1-2009 Information technology. Process assessment. Part 1. Concepts and vocabulary
  • GOST R ISO/IEC TR 19795-3-2009 Automatic identification. Biometrics. Part 3. Modality-specific testing
  • GOST R ISO/IEC 9834-1-2009 Information technology. Open systems interconnection. Procedures for the operation of OSI registration authoritiers. Part 1. General procedures and tor arcs of the ANS. 1 object identifier tree
  • GOST R ISO/IEC 9834-6-2009 Information technology. Open systems interconnection. Procedures for the operation of OSI registration authoritiers. Part 6. Registration of application processes and application entities
  • GOST R ISO/IEC 9834-4-2009 Information technology. Open systems interconnection. Procedures for the operation of OSI registration authoritiers. Part 4. Register of VTE profiles
  • GOST R ISO/IEC 9834-5-2009 Information technology. Open systems interconnection. Procedures for the operation of OSI registration authoritiers. Part 5. Register of VT control object definitions
  • GOST R ISO/IEC 9834-3-2009 Information technology. Open Systems Interconnection. Procedures for the operation of OSI Registration Authoritiers. Part 3. Registration of Object Identifier arcs beneath the top-level arc jointly administered by ISO and ITU-T
  • GOST R IEC 61557-6-2009 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 6. Residual current operated protective devices in TT and TN systems
  • GOST R IEC 62031-2009 LED modules for general lighting. Safety specifications
  • GOST R ISO/IEC TR 15446-2008 Information technology. Security techniques. Guide for the production of protection profiles and security targets
  • GOST R IEC 60227-5-2009 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 5. Flexible cables (cords)
  • GOST R IEC 60949-2009 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
  • GOST R IEC 60227-1-2009 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 1. General requirements
  • GOST R IEC 60287-2-2-2009 Electric cables. Calculation of the current rating. Part 2-2. Thermal resistance. A method for calculating reduction factors for groups of cables in free air, protected from solar radiation
  • GOST R IEC 60287-1-2-2009 Electric cables. Calculation of the current rating. Part 1-2. Current rating equations (100 % load factor) and calculation of losses. Sheath eddy current loss factors for two circuits in flat formation
  • GOST R IEC 60287-1-1-2009 Electric cables. Calculation of the current rating. Part 1-1. Current rating equations (100 % load factor) and calculation of losses. General
  • GOST R IEC 60245-1-2009 Rubber insulated cables for rated voltages up to and including 450/750 V. Part 1. General requirements
  • GOST R IEC 60287-1-3-2009 Electric cables. Calculation of the current rating. Part 1-3. Current rating equations (100 % load factor) and calculation of losses. Current sharing between parallel single-core cables and calculation of circulating current losses
  • GOST R IEC 60287-2-1-2009 Electric cables. Calculation of the current rating. Part 2-1. Thermal resistance. Calculation of thermal resistance
  • GOST R IEC 60724-2009 Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
  • GOST R IEC 60986-2009 Short-circuit temperature limits of electric cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30kV (Um = 36 kV)
  • GOST R IEC/TR 61948-2-2008 Nuclear medicine instrumentation. Routine tests. Part 2. Scintillation cameras and single photon emission computed tomography imaging
  • GOST R ISO/IEC 19795-2-2008 Automatic identification. Biometrics. Biometric performance testing and reporting. Part 2. Testing methodologies for technology and scenario evaluation
  • GOST R ISO/IEC 18046-2009 Automatic identification. Radio frequency identification. Radio frequency identification device performance test methods
  • GOST R IEC 60050-881-2008 International еlectrotechnical vocabulary. Chapter 881. Radiology and radiological physics
  • GOST R IEC 60623-2008 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Vented nickel-cadmium prismatic rechargeable single cells
  • GOST R IEC 61223-3-5-2008 Evaluation and routine testing in medical imaging departments. Part 3-5. Acceptance tests. Imaging performance of computed tomography X-ray equipment
  • GOST R ISO/IEC 16022-2008 Automatic identification. Bar coding. Data Matrix symbology specification
  • GOST R ISO/IEC 15408-1-2008 Information technology. Security techniques. Evaluation criteria for IT security. Part 1. Introduction and general model
  • GOST R IEC 60601-2-43-2008 Medical electrical equipment. Part 2-43. Particular requirements for the safety of X-ray equipment for interventional procedures
  • GOST R ISO/IEC 19794-1-2008 Automatic identification. Biometrics. Biometric data interchange formats. Part 1. Framework
  • GOST R ISO/IEC 19794-9-2009 Automatic identification. Biometrics. Biometric data interchange formats. Part 9. Vascular image data
  • GOST R IEC 60034-14-2008 Rotating electrical machines. Part 14. Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of vibration
  • GOST R ISO/IEC 19794-7-2009 Automatic identification. Biometrics. Biometric data interchange formats. Part 7. Signature/sign time series data
  • GOST R IEC 62209-1-2008 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices. Human models, instrumentation and procedures. Part 1. Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)
  • GOST R ISO/IEC 15408-3-2008 Information technology. Security techniques. Evaluation criteria for IT security. Part 3. Security assurance requirements
  • GOST R ISO/IEC 15408-2-2008 Information technology. Security techniques. Evaluation criteria for IT security. Part 2. Security functional requirements
  • GOST R IEC 60601-2-51-2008 Medical electrical equipment. Part 2-51. Particular requirements for safety, including essential performance, of recording and analysing single channel and multichannel electrocardiographs
  • GOST R IEC 60745-2-4-2008 Hand-held motor-operated electric tools. Safety and test methods. Part 2-4. Particular requirements for sanders and polishers other than disk type
  • GOST R IEC 60252-2-2008 AC motor capacitors. Part 2. Motor start capacitors
  • GOST R IEC 61157-2008 State system for ensuring the uniformity of measurements. Medical electrical equipment. Devices for ultrasonic diagnostics. Requirements for the declaration of acoustic output parameters in technical documents

  • GOST R IEC 60745-2-11-2008 Hand-held motor-operated electric tools. Safety and test methods. Part 2-11. Particular requirements for reciprocating saws (jig and sabre saws)
  • GOST R IEC 60079-14-2008 Explosive atmospheres. Part 14. Electrical installations design, selection and erection
  • GOST R IEC 60945-2007 Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results
  • GOST R ISO/IEC 17021-2008 Conformity assessment. Requirements for bodies providing audit and certification of management systems
  • GOST R IEC 61241-14-2008 Electrical apparatus for use in the presence of combustible dust. Part 14. Selection and installation
  • GOST R IEC 60079-10-1-2008 Explosive atmospheres. Part 10-1. Classification of areas. Explosive gas atmospheres
  • GOST R IEC 60079-25-2008 Explosive atmospheres. Part 25. Intrinsically safe systems
  • GOST R ISO/IEC TR 18044-2007 Information technology. Security techniques. Information security incident management
  • GOST R ISO/IEC TR 10032-2007 Reference model of data management
  • GOST R ISO/IEC 19785-2-2008 Information identification. Biometrics. Common biometric exchange formats framework. Part 2. Procedures for the operation of the biometric registration authority
  • GOST R ISO/IEC 19785-1-2008 Automatic identification. Biometrics. Common biometric exchange formats framework. Part 1. Data element specification
  • GOST R ISO/IEC 16085-2007 Risk management. Application for system and software life cycle processes
  • GOST R IEC 60079-1-2008 Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures "d"
  • GOST R ISO/IEC 19784-1-2007 Automatic identification. Biometrics. BioAPI. Biometric application programming interface. Part 1. BioAPI specification
  • GOST R ISO/IEC 19795-1-2007 Automatic identification. Biometrics. Biometric performance testing and reporting. Part 1. Principles and framework
  • GOST R ISO/IEC 15459-5-2008 Automatic identification. International unique identifiers. Part 5. Unique identifiers for returnable transport items
  • GOST R IEC 60605-6-2007 Reliability in techniques. Tests for the validity of the constant failure rate and failure intensity
  • GOST R IEC 60079-18-2008 Explosive atmospheres. Part 18. Equipment protection by encapsulation «m»
  • GOST R IEC 60079-27-2008 Explosive atmospheres. Part 27. Fieldbus intrinsically safe concept (FISCO)
  • GOST R IEC 62281-2007 Safety of primary and secondary lithium cells and batteries during transport
  • GOST R IEC 62259-2007 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Nickel-cadmium prismatic secondary single cells with partial recombination
  • GOST R IEC 61960-2007 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications
  • GOST R IEC 61959-2007 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Mechanical tests for sealed portable secondary cells and batteries
  • GOST R IEC 61951-2-2007 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells. Part 2. Nickel-metal hydride
  • GOST R IEC 60034-5-2007 Rotating electrical machines. Part 5. Classification of protection degrees provided by the integral design of rotating electrical machines (IP code)
  • GOST ISO/IEC 15459-1-2008 Automatic identification. International unique identifiers. Part 1. Unique identifiers for transport units
  • GOST ISO/IEC 15459-2-2008 Automatic identification. International unique identifiers. Part 2. Registration procedures
  • GOST R IEC 60838-1-2008 Miscellaneous lampholders. Part 1. General requirements and test methods
  • GOST R IEC 61557-5-2008 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 5. Resistance to earth
  • GOST R IEC 60245-4-2008 Rubber insulated cables for rated voltages up to and including 450/750 V. Part 4. Cords and flexibe cables
  • GOST R IEC 60245-8-2008 Rubber insulated cables for rated voltages up to and including 450/750 V. Part 8. Cords for applications requiring high flexbility
  • GOST R IEC 60811-1-4-2008 Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-4. Methods for general application. Test at low temperature
  • GOST R IEC 60851-4-2008 Winding wires. Test methods. Part 4. Chemical properties
  • GOST R IEC 60851-5-2008 Winding wires. Test methods. Part 5. Electrical properties
  • GOST R IEC 60811-4-1-2008 Common test methods for insulating and sheathing materials of electric and optical cables. Part 4-1. Methods specific to polyethylene and polypropylene compounds. Resistance to environmental stress cracking. Measurement of the melt flow index. Carbon black and/or mineral filler content measurement in polyethylene by direct combustion. Measurement of carbon black content by thermogravimetric analysis (TGA). Assessment of carbon black dispersion in polyethylene using a microscope
  • GOST R IEC 61508-7-2007 Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 7. Techniques and measures
  • GOST R IEC 61508-2-2007 Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 2. Requirements for systems
  • GOST R IEC 61508-6-2007 Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 6. Guidelines on the application of
  • GOST R IEC 61508-2-2007 and
  • GOST R IEC 61508-3-2007
  • GOST R IEC 61508-4-2007 Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 4. Terms and definitions
  • GOST R IEC 61508-1-2007 Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 1. General requirements
  • GOST R IEC 61508-3-2007 Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 3. Software requirements
  • GOST R IEC 61508-5-2007 Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 5. Guidelines for methods of the determination of safety integrity levels
  • GOST R IEC 60601-1-8-2007 Medical electrical equipment. Part 1-8. General requirements for safety. General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
  • GOST R IEC 60601-1-1-2007 Medical electrical equipment. Part 1-1. General requirements for safety. Safety requirements for medical electrical systems
  • GOST R IEC 60204-1-2007 Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements
  • GOST R IEC 61650-2007 Reliability in techniques. Procedures for comparison of constant failure rates and constant failure intensities
  • GOST R IEC 60950-21-2005 Information technology equipment. Safety requirements. Part 21. Remote power feeding
  • GOST R IEC 60745-2-14-2007 Hand-held motor-operated electric tools. Safety and test methods. Part 2-14. Particular requirements for planers

  • GOST R IEC 60745-2-6-2007 Hand-held motor-operated electric tools. Safety and test methods. Part 2-6. Particular requirements for hammers and rotary hammers
  • GOST R IEC 60745-2-5-2007 Hand-held motor-operated electric tools. Safety and test methods. Part 2-5. Particular requirements for circular saws
  • GOST R IEC 60580-2006 Medical electrical equipment. Dose area product meters
  • GOST R IEC 61084-2-4-2007 Cable trunking and ducting systems for electrical installations. Part 2. Particular requirements. Section 4. Service poles
  • GOST R IEC 61084-2-2-2007 Cable trunking and ducting systems for electrical installations. Part 2-2. Particular requirements. Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations
  • GOST R IEC 61084-2-1-2007 Cable trunking and ducting systems for electrical installations. Part 2. Particular requirements. Section 1. Cable trunking and ducting systems intended for mounting on walls or ceilings
  • GOST R IEC 61084-1-2007 Cable trunking and ducting systems for electrical installations. Part 1. General requirements
  • GOST R IEC 60811-1-3-2007 Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-3. General application methods. Methods for determining the density. Water absorption tests. Shrinkage test
  • GOST R IEC 60332-2-1-2007 Tests on electric and optical fibre cables under fire conditions. Part 2-1. Test for vertical flame propagation for a single small insulated wire or cable. Apparatus
  • GOST R IEC 60332-2-2-2007 Tests on electric and optical fibre cables under fire conditions. Part 2-2. Test for vertical flame propagation for a single small insulated wire or cable. Procedure for diffusion flame
  • GOST R IEC 60332-1-3-2007 Tests on electric and optical fibre cables under fire conditions. Part 1-3. Test for vertical flame propagation for a single insulated wire or cable. Procedure for determination of flaming droplets/particles
  • GOST R IEC 60332-1-2-2007 Tests on electric and optical fibre cables under fire conditions. Part 1-2. Test for vertical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame
  • GOST R IEC 60332-1-1-2007 Tests on electric and optical fibre cables under fire conditions. Part 1-1. Test for vertical flame propagation for a single insulated wire or cable. Apparatus
  • GOST R IEC 60331-31-2007 Tests for electric cables under fire conditions. Circuit integrity. Part 31. Procedures and requirements for fire with shock. Cables of rated voltage up to and including 0,6/1,0 kV
  • GOST R IEC 60331-12-2007 Tests for electric cables under fire conditions. Circuit integrity. Part 12. Apparatus. Fire with shock at a temperature of at least 830 °C
  • GOST R ISO/IEC 15459-4-2007 Automatic identification. International unique identifiers. Part 4. Unique identifiers of individual items for supply chain management
  • GOST R ISO/IEC 15459-3-2007 Automatic identification. International unique identifiers. Part 3. Common rules for unique identifiers
  • GOST R ISO/IEC 27001-2006 Information technology. Security techniques. Information security management systems. Requirements
  • GOST R ISO/IEC 17030-2007 General requirements for third party marks of conformity
  • GOST R IEC 60269-4-1-2007 Low-voltage fuses. Part 4-1. Supplementary requirements for fuse-links for the protection of semiconductor devices. Sections I to III. Examples of types of standardized fuse-links
  • GOST R IEC 60127-4-2007 Miniature fuses. Part 4. Universal modular fuse-links for through-hole and surfase mount types
  • GOST R ISO/IEC 15434-2007 Automatic identification. Syntax for high-capacity automatic data capture media
  • GOST R IEC 61241-0-2007 Electrical apparatus for use in the presence of combustible dust. Part 0. General requirements
  • GOST R IEC 61241-10-2007 Electrical apparatus for use in the presence of combustible dust. Part 10. Classification of areas where combustible dusts are or may be present
  • GOST R IEC 60601-1-6-2007 Medical electrical equipment. Part 1-6. General requirements for safety. Usability
  • GOST R ISO/IEC 11694-4-2006 Identification cards. Optical memory cards. Linear recording method. Part 4. Logical data structures
  • GOST R ISO/IEC 15457-3-2006 Identification cards. Thin flexible cards. Part 3. Test methods
  • GOST R ISO/IEC 15457-1-2006 Identification cards. Thin flexible cards. Part 1. Physical characteristics
  • GOST IEC 60641-2-2006 Pressboard and presspaper for electrical purposes. Part 2. Methods of tests
  • GOST R IEC 60297-3-103-2006 Mechanical structures for radio-electronic equipment. Keying and alignment pin. Dimensions of mechanical structures of the 482,6 mm (19 in) series
  • GOST R IEC 60297-3-102-2006 Mechanical structures for radio-electronic equipment. Injector/extractor handle. Dimensions of mechanical structures of the 482,6 mm (19 in) series
  • GOST R IEC 60297-3-101-2006 Mechanical structures for radio-electronic equipment. Subracks and associated plug-in units. Dimensions of mechanical structures of the 482,6 mm (19 in) series
  • GOST R IEC 60745-2-1-2006 Hand-held motor-operated electric tools. Safety and test methods. Part 2-1. Particular requirements for drills and impact drill machines
  • GOST R ISO/IEC 7810-2006 Identification cards. Physical characteristics
  • GOST R ISO/IEC 7816-3-2006 Information technology. Identification cards. Integrated circuit(s) cards with contacts. Part 3. Electronic signals and transmission protocols
  • GOST R ISO/IEC 10536-1-2006 Identification cards. Contactless integrated circuit(s) cards. Close-coupled cards. Part 1. Physical characteristics
  • GOST R IEC 60601-2-7-2006 Medical electrical equipment. Part 2-7. Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators
  • GOST R IEC 61676-2006 Medical electrical equipment. Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
  • GOST R IEC 62220-1-2006 Medical electrical equipment. Characteristics of digital X-ray imaging devices. Part 1. Determination of the detective quantum efficiency
  • GOST R IEC 60601-2-2-2006 Medical electrical equipment. Part 2. Particular requirements for the safety of high frequency surgical equipment
  • GOST R ISO/IEC TR 13335-5-2006 Information technology. Security techniques. Part 5. Management quidance on network security
  • GOST R ISO/IEC 13335-1-2006 Information technology. Security techniques. Part 1. Concepts and models for information and communications technology security management
  • GOST R IEC 60050-426-2006 International electrotechnical vocabulary. Chapter 426. Electric equipment for explosive atmospheres
  • GOST R IEC 60898-2-2006 Circuit-breakers for overcurrent protection for household and similar installations. Part 2. Circuit-breakers for a.c. and d.c. operation
  • GOST R ISO/IEC 19794-6-2006 Automatic identification. Biometrics. Biometric data interchange formats. Part 6. Iris image data
  • GOST R IEC 61675-3-2006 Radionuclide imaging devices. Characteristics and test conditions. Part 3. Gamma camera based wholebody imaging systems
  • GOST R IEC 61675-1-2006 Radionuclide imaging devices. Characteristics and test conditions. Part 1. Positron emission tomographs
  • GOST R IEC 61675-2-2006 Radionuclide imaging devices. Characteristics and test conditions. Part 2. Single photon emission computed tomographs

  • GOST R ISO/IEC 19794-4-2006 Automatic identification. Biometrics. Biometric data interchange formats. Part 4. Finger image data
  • GOST R IEC 61160-2006 Risk management. Formal design review
  • GOST R IEC 60811-1-2-2006 Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods
  • GOST R ISO/IEC 15288-2005 Information technology. System engineering. System life cycle processes
  • GOST R IEC 60050-195-2005 Earthing and protection against electric shock. Terms and definitions
  • GOST R IEC 60811-4-2-2006 Common test methods for insulating and sheathing materials of electric and optical cables. Part 4-2. Methods specific to polyethylene and polypropylene compounds. Tensile strength and elongation at break after conditioning at elevated temperature. Wrapping test after conditioning at elevated temperature. Wrapping test after thermal ageing in air. Measurement of mass increase. Long-term stability test. Test method for copper-catalyzed oxidative degradation
  • GOST R IEC 60811-2-1-2006 Common test methods for insulating and sheathing materials of electric and optical cables. Part 2-1. Methods specific to elastomeric compounds. Ozone resistance, hot set and mineral oil immersion tests
  • GOST R IEC 61034-2-2005 Measurement of smoke density of cables burning under defined conditions. Part 2. Test procedure and requirements
  • GOST R IEC 62086-2-2005 Electrical apparatus for explosive gas atmospheres. Electrical resistance trace heaters. Part 2. Application guide for design, installation and maintenance
  • GOST R IEC 61034-1-2005 Measurement of smoke density of cables burning under defined conditions. Part 1. Test apparatus
  • GOST R IEC 60745-1-2005 Hand-held motor-operated electric tools. Safety and test methods. Part 1. General requirements
  • GOST R ISO/IEC 17799-2005 Information technology. Code of practice for information security management
  • GOST R IEC 61557-1-2005 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 1. General requirements
  • GOST R IEC 60870-5-103-2005 Telecontrol equipment and systems. Part 5. Transmission protocols. Section 103. Companion standard for the informative interface of protection equipment
  • GOST R IEC 61850-3-2005 Communication networks and systems in substations. Part 3. General requirements
  • GOST R IEC 61010-031-2005 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 031. Safety requirements for hand-held probe assemblies for electrical measurement and test
  • GOST R IEC 60870-5-101-2006 Telecontrol equipment and systems. Part 5. Transmission protocol. Section 101. Companion standard for basic telecontrol tasks
  • GOST IEC 60335-2-92-2004 Safety of household and similar electrical appliances. Part 2-92. Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators
  • GOST IEC 60335-2-94-2004 Safety of household and similar electrical appliances. Part 2-94. Particular requirements for scissors type grass shears
  • GOST R IEC 62086-1-2005 Electrical apparatus for explosive gas atmospheres. Electrical resistance trace heaters. Part 1. General technical requirements and test methods
  • GOST ISO/IEC 16390-2005 Automatic identification. Bar coding. Symbology specifications. Interleaved 2 of 5
  • GOST R IEC 60519-1-2005 Safety in electroheat equipment. Part 1. General requirements
  • GOST R IEC 60252-1-2005 AC motor capacitors. Part 1. General. Performance, testing and rating. Safety requirements. Guide for installation and operation
  • GOST R IEC 60127-1-2005 Miniature fuses. Part 1. Definitions for miniature fuses and general requirements for miniature fuse-links
  • GOST R ISO/IEC 19794-2-2005 Automatic identification. Biometrics. Biometric data interchange formats. Part 2. Finger minutiae data
  • GOST R IEC 61048-2005 Auxiliaries for lamps. Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements
  • GOST R IEC 60332-3-21-2005 Tests on electric and optical cables under fire conditions. Рart 3-21. Flame spread of vertically-mounted bunched wires or cables. Category A F/R
  • GOST R ISO/IEC 15423-2005 Automatic identification. Bar coding. General requirements for bar code scanner and decoder performance testing
  • GOST R ISO/IEC 15419-2005 Automatic identification. Bar coding. Bar code digital imaging and printing systems. General and performance requirements
  • GOST R IEC 60627-2005 Diagnostic Х-ray imaging equipment. Characteristics of general purpose and mammographic anti-scatter grids
  • GOST R IEC 60601-2-44-2005 Medical electrical equipment. Part 2-44. Particular requirements for the safety of X-ray equipment for computed tomography
  • GOST R IEC 60601-2-45-2005 Medical electrical equipment. Part 2-45. Particular requirements for safety of mammographic X-ray equipmеnt and mammographic stereotactic devices
  • GOST R IEC 60974-1-2004 Arc welding power sources. Safety requirements
  • GOST R ISO/IEC 2382-23-2004 Information technology. Vocabulary. Part 23. Text processing
  • GOST R IEC 60384-14-2004 Fixed capacitors for use in electronic equipment. Part 14. Sectional specification on fixed capacitors for electromagnetic interference suppression and connection to the supply mains
  • GOST R IEC 60384-14-1-2004 Fixed capacitors for use in electronic equipment. Part 14-1. Blank detail specification on fixed capacitors for electromagnetic interference suppression and connection to the supply mains. Assessment level D
  • GOST R IEC 60269-3-1-2004 Low-voltage fuses. Part 3-1. Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications). Sections I to IV
  • GOST R ISO/IEC 7816-4-2004 Information technology. Identification cards. Integrated circuit(s) cards with contacts. Part 4. Interindustry commands for interchange
  • GOST R ISO/IEC 10536-3-2004 Identification cards. Contactless integrated circuit(s) cards. Part 3. Electronic signals and reset procedures
  • GOST R IEC 61430-2004 Secondary cells and batteries. Test methods for checking the performance of devices designed for reducing explosion hazards. Lead-acid starter batteries
  • GOST R IEC 61436-2004 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride rechargeable single cells
  • GOST R IEC 61951-1-2004 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells. Part 1. Nickel-cadmium
  • GOST R IEC 62133-2004 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for portable sealed secondary cells, and batteries made from them, for use in portable applications
  • GOST R ISO/IEC 15693-2-2004 Identification cards. Contactless integrated circuit(s) cards. Vicinity cards. Part 2. Air interface and initialization
  • GOST R ISO/IEC 14443-1-2004 Identification cards. Contactless integrated circuit(s) cards. Proximity cards. Part 1. Physical characteristics
  • GOST R ISO/IEC 15693-1-2004 Identification cards. Contactless integrated circuit(s) cards. Vicinity cards. Part 1. Physical characteristics
  • GOST R ISO/IEC 10536-2-2004 Identification cards. Contactless integrated circuit(s) cards. Part 2. Dimensions and location of coupling areas

  • GOST R ISO/IEC 7816-10-2004 Identification cards. Integrated circuit(s) cards with contacts. Part 10. Electronic signals and answer to reset for synchronous cards
  • GOST R IEC 60870-5-104-2004 Telecontrol equipment and systems. Part 5. Transmission protocols. Section 104. Network access for IEC 60870-5-101 using standard transport profiles
  • GOST R ISO/IEC 10746-1-2004 Information technology. Open distributed processing. Reference model. Part 1. Overview
  • GOST R ISO/IEC 10746-4-2004 Information technology. Open distributed processing. Reference model. Part 4. Architectural semantics
  • GOST R IEC 61429-2004 Мarking of secondary cells and batteries with the international recycling symbol ISO 7000-1135
  • GOST R ISO/IEC 10165-6-2003 Information technology. Open systems interconnection. Structure of management information. Part 6. Requirements and guidelines for implementation conformance statement proformas associated with OSI management
  • GOST R ISO/IEC 10165-7-2003 Information technology. Open systems interconnection. Structure of management information. Part 7. General relationship model
  • GOST R ISO/IEC 10165-5-2003 Information technology. Open systems interconnection. Structure of management information. Part 5. General management information
  • GOST R ISO/IEC 11694-3-2003 Identification cards. Optical memory cards. Linear recording method. Part 3. Optical properties and characteristics
  • GOST R ISO/IEC 7816-6-2003 Identification cards. Integrated circuit(s) cards with contacts. Part 6. Interindustry data elements
  • GOST R IEC 60384-1-2003 Fixed capacitors for use in electronic equipment. Part 1. General specifications
  • GOST R IEC 60118-14-2003 Programmable hearing aids. Specification of a digital interface devices. Dimensions of electrical connectors
  • GOST R ISO/IEC 8825-2-2003 Information technology. ASN.1 encoding rules. Part 2. Specification of packed encoding rules (PER)
  • GOST R ISO/IEC 8825-1-2003 Information technology. ASN.1 encoding rules. Part 1. Specification of basic encoding rules (BER), canonical encoding rules (СER) and distinguished encoding rules (DER)
  • GOST IEC 60554-3-1-2002 Cellulosic papers for electrical purposes. Technical requirements. Part 3. General technical requirements for individual materials. Sheet 1. General purpose electrical papers
  • GOST R IEC 60695-1-1-2003 Fire hazard testing. Part 1-1. Guidance for assessing the fire hazard of electrotechnical products. General guidelines
  • GOST R IEC 60331-11-2003 Tests for electric and optical fibre cables under fire conditions. Circuit integrity. Part 11. Apparatus. Fire alone at a flame temperature of at least 750 °C
  • GOST R IEC 60331-21-2003 Tests for electric and optical fibre cables under fire conditions. Circuit integrity. Part 21. Procedures and requirements. Cables of rated voltage up to and including 0,6/1,0 kV
  • GOST R IEC 60331-23-2003 Tests for electric and optical fibre cables under fire conditions. Circuit integrity. Part 23. Procedures and requirements. Electric data cables
  • GOST R IEC 60331-25-2003 Tests for electric and optical fibre cables under fire conditions. Circuit integrity. Part 25. Procedures and requirements. Optical fibre cables
  • GOST R IEC 60598-1-2003 Luminaires. Part 1. General requirements and test methods
  • GOST R ISO/IEC 8824-4-2003 Information technology. Abstract syntax notation one (ASN.1). Part 4. Parameterization of ASN.1 specifications
  • GOST R IEC 60715-2003 Low-voltage switchgear and controlgear. Mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations
  • GOST R IEC 60285-2002 Alcaline secondary cells and batteries. Sealed nickel-cadmium cylindrical single cells
  • GOST R IEC 60509-2002 Alcaline secondary cells and batteries. Sealed nickel-cadmium button rechargeable single cells
  • GOST R ISO/IEC 8824-3-2002 Information technology. Abstract syntax notation one (ASN.1). Part 3. Constraint specification
  • GOST R ISO/IEC 50-2002 Child safety and standards. General requirements
  • GOST R ISO/IEC 15910-2002 Information technology. Software user documentation process
  • GOST R ISO/IEC 14764-2002 Information technology. Software maintenance
  • GOST R ISO/IEC 37-2002 Products of consumer interest. Instructions for use. General requirements
  • GOST R ISO/IEC 15426-1-2002 Automatic identification. Bar coding. Linear bar code symbols verifier. Conformity requirements
  • GOST R ISO/IEC 15026-2002 Information technology. System and software integrity levels
  • GOST R ISO/IEC TR 12182-2002 Information technology. Categorization of software
  • GOST R ISO/IEC TR 16326-2002 Software engineering. Guide for the application of
  • GOST R ISO/IEC 12207 to project management
  • GOST R ISO/IEC TR 15271-2002 Information technology. Guide for the application of
  • GOST R ISO/IEC 12207 (Software life cycle processes)
  • GOST R ISO/IEC 7811-2-2002 Identification cards. Recording technique. Part 2. Magnetic stripe of low coercivity
  • GOST R IEC 60950-2002 Safety of information technology equipment
  • GOST R IEC 893-3-2-2002 Industrial rigid laminated sheets. Requirements for rigid laminated sheets based on epoxide resins. Specifications
  • GOST R IEC 61037-2001 Electricity metering. Tariff and load control. Particular requirements for electronic ripple control receivers
  • GOST R IEC 61107-2001 Data exchange for meter reading, tariff and load control. Direct local data exchange
  • GOST R IEC 61038-2001 Electricity metering. Tariff and load control. Particular requirements for time switches
  • GOST R IEC 61142-2001 Data exchange for meter reading, tariff and load control. Local bus data exchange
  • GOST R IEC 61223-2-9-2001 Evaluation and routine testing in medical imaging departments. Part 2-9. Constancy tests. Equipment for indirect radioscopy and indirect radiography
  • GOST R IEC 61223-3-4-2001 Evaluation and routine testing in medical imaging departments. Part 3-4. Imaging performance of dental X-ray equipment. Acceptance tests
  • GOST R IEC 60851-1-2002 Winding wires. Test methods. Part 1. General
  • GOST R IEC 60851-6-2002 Winding wires. Test methods. Part 6. Thermal properties
  • GOST R IEC 60851-2-2002 Winding wires. Test methods. Part 2. Determination of dimensions
  • GOST R IEC 60851-3-2002 Winding wires. Test methods. Part 3. Mechanical properties
  • GOST R IEC 61223-2-7-2001 Evaluation and routine testing in medical imaging departments. Part 2-7. Constancy tests. Equipment for intra-oral dental radiography
  • GOST R IEC 61223-2-10-2001 Evaluation and routine testing in medical imaging departments. Part 2-10. Constancy tests. X-ray equipment for mammography
  • GOST R IEC 61223-2-11-2001 Evaluation and routine testing in medical imaging departments. Part 2-11. Constancy tests. Equipment for general direct radiography
  • GOST R IEC 60526-2001 High-voltage cable plug and socket connections for medical X-ray equipment

  • GOST R IEC 61223-3-1-2001 Evaluation and routine testing in medical imaging departments. Part 3-1. Imaging performance of X-ray equipment for radiographic and radioscopic systems. Acceptance tests
  • GOST R IEC 61953-2001 Diagnostic X-ray imaging equipment. Characteristics of mammographic anti-scatter grids
  • GOST R IEC 61859-2001 Radiotherapy treatment rooms. General safety requirements
  • GOST R IEC 61223-2-6-2001 Evaluation and routine testing in medical imaging departments. Part 2-6. Constancy tests. X-ray equipment for computed tomography
  • GOST R IEC 60245-2-2002 Rubber insulated cables of rated voltages up to and including 450/750 V. Test methods
  • GOST R IEC 60799-2002 Electrical accessories. Cord sets and interconnection cord sets
  • GOST R IEC 60227-4-2002 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Sheathed cables for fixed wiring
  • GOST R IEC 60227-3-2002 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
  • GOST R IEC 60536-2-2001 Classification of electrical and electronic equipment with regard to protection against electric shock. Part 2. Guidelines to requirements for protection against electric shock
  • GOST R IEC 60335-2-76-2001 Safety of household and similar electrical appliances. Particular requirements for electric fence energizers and test methods
  • GOST R ISO/IEC 10746-3-2001 Information technology. Open Systems Interconnection. Data control and Open Distributed Processing. Reference model. Part 3. Architecture
  • GOST R ISO/IEC 10166-1-2001 Information technology. Text and office systems. Document Filing and Retrieval (DFR). Part 1. Abstract service definition and procedures
  • GOST R IEC 60522-2001 X-ray tube assemblies. Methods for determination of the permanent filtration
  • GOST R IEC 61267-2001 Medical diagnostic X-ray equipment. Radiation conditions for use in the determination of characteristics
  • GOST R IEC 60731-2001 Medical electrical equipment. Dosimeters with ionization chambers in radiotherapy
  • GOST R IEC 60335-2-88-2001 Safety of household and similar electrical appliances. Particular requirements for humidifiers intended for use with heaters, ventilators and air-conditioning systems and test methods
  • GOST R IEC 60335-2-53-2001 Safety of household and similar electrical appliances. Particular requirements for sauna heating appliances and test methods
  • GOST R IEC 61223-3-3-2001 Evaluation and routine testing in medical imaging departments. Part 3-3. Imaging performance of X-ray equipment for digital subtraction angiography (DSA). Acceptance tests
  • GOST R IEC 61223-2-1-2001 Evaluation and routine testing in medical imaging departments. Part 2-1. Constancy tests. Film processors
  • GOST R IEC 61223-3-2-2001 Evaluation and routine testing in medical imaging departments. Part 3-2. Imaging performance of mammographic X-ray equipment. Acceptance tests
  • GOST R IEC 61223-2-4-2001 Evaluation and routine testing in medical imaging departments. Part 2-4. Сonstancy tests. Hard copy cameras
  • GOST R IEC 61223-2-2-2001 Evaluation and routine testing in medical imaging departments. Part 2-2. Сonstancy tests. Radiographic cassettes and film changers. Film-screen contact and relative sensitivity of the screen-cassette assembly
  • GOST R ISO/IEC 10165-1-2001 Information technology. Open systems interconnection. Structure of management information. Management information model
  • GOST R ISO/IEC 10165-4-2001 Information technology. Open systems interconnection. Structure of management information. Guidelines for the definition of managed objects
  • GOST R ISO/IEC 8824-2-2001 Information technology. Abstract syntax notation one (ASN.1). Information object specification
  • GOST R ISO/IEC 10165-2-2001 Information technology. Open systems interconnection. Structure of management information. Definition of management information
  • GOST R IEC 60335-2-78-2001 Safety of household and similar electrical appliances. Particular requirements for outdoor barbecues and test methods
  • GOST R IEC 61094-2-2001 State system for ensuring the uniformity of measurements. Measurement microphones. Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
  • GOST R IEC 61094-3-2001 State system for ensuring the uniformity of measurements. Measurement microphones. Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
  • GOST R IEC 60870-2-2-2001 Telecontrol equipment and systems. Part 2. Operating conditions. Section 2. Environmental conditions (climatic, mechanical and other non-electrical influences)
  • GOST R IEC 60711-2001 Occluded-ear simulator. Technical requirements and test methods
  • GOST R IEC 60601-2-13-2001 Medical electrical equipment. Part 2. Particular requirements for the safety of anaesthetic workstations
  • GOST R IEC 748-11-1-2001 Semiconductor devices integrated circuits. Part 11. Section 1. Internal visual examination for semiconductor integrated circuits excluding hybrid circuits
  • GOST R IEC 870-5-102-2001 Telecontrol equipment and systems. Part 5. Transmission protocol. Section 102. Companion standard for the transmission of integrated totals in electric power systems
  • GOST R ISO/IEC 10166-2-2001 Information technology. Text and office systems. Document filing and retrieval (DFR). Part 2. Protocol specification
  • GOST R ISO/IEC 10746-2-2000 Information technology. Open distributed processing. Part 2. Reference model
  • GOST R IEC 61140-2000 Protection against electric shock. Common aspects for installation and equipment
  • GOST R ISO/IEC 10031-2-2000 Information technology. Text and office systems. Distributed-office-applications model. Part 2. Distinguished-object-reference and associated procedures
  • GOST R IEC 60447-2000 Man-machine interface. Actuating principles
  • GOST R IEC 60073-2000 Basic and safety principles for man-machine interfase, marking and identification. Coding principles for indication devices and actuators
  • GOST R ISO/IEC 10031-1-2000 Information technology - Text and office systems - Distributed-office-applications model - Part 1^ General model
  • GOST R ISO/IEC 10740-2-2000 Information technology. Text and office systems. Referenced Dana Transfer. Part 2. Protocol specification
  • GOST R ISO/IEC 12119-2000 Information technology. Software packages. Quality requirements and testing
  • GOST R IEC 61293-2000 Electrical equipment. Marking of electrical equipment with ratings related to electrical supply. Safety requirements
  • GOST R IEC 61032-2000 Protection of persons and equipment by enclosures. Probes for verification
  • GOST R IEC 61217-99 Radiotherapy equipment. Coordinates, movements and scales
  • GOST R IEC 60613-99 Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnisis
  • GOST R ISO/IEC 65-2000 General requirements for bodies operating product certification systems
  • GOST R IEC 61168-99 Radiotherapy simulators (imitators). Functional performance characteristics

  • GOST R IEC 61170-99 Radiotherapy simulators (imitators). Guidelines for functional performance characteristics
  • GOST R IEC 61262.7-99 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 7. Determination of modulation transfer function
  • GOST R IEC 61058.1-2000 Switches for electrical appliances. Part 1. General requirements and test methods
  • GOST R IEC 61303-99 Medical electrical equipment. Radionuclide calibrators. Particular methods for describing performance
  • GOST R ISO/IEC TR 10183-1-2000 Information technology. Text and office systems. Office Document Architecture (ODA) and interchange format. Technical Report on ISO 8613 implementation testing. Part 1. Testing methodology
  • GOST R ISO/IEC TR 10735-2000 Information technology. Telecommunications and information exchange between systems. Standard group MAC addresses
  • GOST R IEC 821-2000 IEC 821 VME bus. Microprocessor system bus for 1 byte to 4 byte data
  • GOST R IEC 60335-2-52-2000 Safety of household and similar electrical appliances. Particular requirements for oral hygiene appliances and test methods
  • GOST R IEC 60335-2-55-2000 Safety of household and similar electrical appliances. Particular requirements for electrical appliances for use with aquaria and garden ponds and test methods
  • GOST R IEC 61262.5-99 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 5. Determination of the detective quantum efficiency
  • GOST R IEC 61262.6-99 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 6. Determination of the contrast ratio and veiling glare index
  • GOST R IEC 61262.3-99 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 3. Determination of the luminance distribution and luminance non-uniformity
  • GOST R IEC 61262.1-99 Medical electrical eguipment. Characteristics of electro-optikal X-ray image intensifiers. Part 1. Determination of the entrance field size
  • GOST R IEC 60976-99 Medical electrical equipment. Medical electron accelerators. Functional characteristics
  • GOST R IEC 1029-2-8-2000 Electric transportable tools. Particular safety requirements and methods of testing single spindle vertical moulders
  • GOST R IEC 870-6-2-2000 Telecontrol equipment and systems. Part 6. Telecontrol protocols compatible with ISO standards and ITU-T recommendations Section 2. Use of basic standards (OSI layers 1-4)
  • GOST R IEC 61241-1-2-99 Electrical apparatus for use in the presence of combustible dust. Past 1:2. Electrical apparatus protected by enclosures and surface temperature limitation. Selection, installation and maintenance
  • GOST R IEC 61210-99 Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements
  • GOST R ISO/IEC TR 10000-3-99 Information technology. Framework and taxonomy of International Standardized Profiles. Part 3. Principles and taxonomy for open system environment profiles
  • GOST R ISO/IEC TR 10000-2-99 Information technology. Framework and taxonomy of International Standardized Profiles. Part 2. Principles and taxonomy for OSI profiles
  • GOST R ISO/IEC TR 10000-1-99 Information technology. Framework and taxonomy of International Standardized Profiles. Part 1. General principles and documentation framework
  • GOST R IEC 61241-3-99 Electrical apparatus for use in the presence of combustible dust. Part 3. Classification of areas
  • GOST R IEC 61241-2-3-99 Electrical apparatus for use in the presence of combustible dust. Part 2. Test methods. Section 3. Method for determining minimum ignition energy of dust/air mixtures
  • GOST R IEC 61241-2-2-99 Electrical apparatus for use in the presence of combustible dust. Part 2. Test methods. Section 2. Method for determining the electrical resistivity of dust in layers
  • GOST R IEC 61241-2-1-99 Electrical apparatus for use in the presence of combustible dust. Part 2. Test methods. Section 1. Methods for determining the minimum ignition temperatures of dust
  • GOST R IEC 61010-2-061-99 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-061. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
  • GOST R IEC 61010-2-010-99 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
  • GOST R IEC 61010-2-051-99 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-051. Particular requirements for laboratory equipment for mixing and stirring
  • GOST R IEC 61010-2-032-99 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for hand-held current clamps for electrical measurement and test
  • GOST R IEC 60335-2-77-99 Safety of household and similar electrical appliances. Particular requirements for pedestrian controlled mains-operated lawnmowers and test methods
  • GOST R IEC 61010-2-020-99 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges
  • GOST R IEC 60896-2-99 Stationary lead-acid batteries. General requirements and methods of test. Part 2. Valve regulated types
  • GOST R IEC 61056-2-99 Portable lead-acid cells and batteries (valve-regulated types). Part 2. Dimensions, terminals and marking
  • GOST R IEC 61056-1-99 Portable lead-acid cells and batteries (valve-regulated types). Part 1. General requirements, functional characteristics. Methods of test
  • GOST R IEC 61056-3-99 Portable lead-acid cells and batteries (valve-regulated types). Part 3. Safety recommendations for use in electric appliances
  • GOST R IEC 61010-2-041-99 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-041. Particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory processes
  • GOST R IEC 60754-1-99 Tests of materials from cables during combustion. Determination of the amount of evolved halogen acid gas
  • GOST R IEC 60754-2-99 Tests of materials from cables during combustion. Determination of degree of evolved gases by measuring pH and conductivity
  • GOST R IEC 62127-3-2010 State system for ensuring the uniformity of measurements. Hydrophones. General requirements to properties for measurements of ultrasonic fields in the frequency range up to 40 MHz
  • GOST ISO/IEC 15426-1-2003 Automatic identification. Bar coding. Linear bar code symbols verifier. Conformity requirements
  • GOST R IEC 60335-2-73-2000 Safety of household and similar electrical appliances. Particular reguirements for fixed immersion heaters and test methods
  • GOST R IEC 60065-2002 Audio-, video- and similar electronic apparatus. Safety requirements
  • GOST R ISO/IEC 8824-1-2001 Information technology. Abstract Syntax Notation One (ASN.1). Specification of basic notation
  • GOST R ISO/IEC 10740-1-2000 Information technology. Text and office systems. Referenced Dana Transfer. Part 1: Abstract service definition
  • GOST R IEC 61241-1-1-99 Electrical apparatus for use in the presence of combustible dust. Part 1-1. Electrical apparatus protected by enclosures and surface temperature limitation. Specification for apparatus
  • GOST R IEC 60901-99 Single-capped fluorescent lamps. Performance specifications
  • GOST R IEC 793-1-93 Optical fibres. General speсifications

  • GOST R ISO/IEC 9594-3-98 Information technology. Open Systems Interconnection. The directory. Part 3. Abstract service definition
  • GOST IEC 730-1-95 Automatic electrical controls for household and similar use. General requirements and test methods
  • GOST R IEC 870-4-93 Telecontrol equipment and systems. Part 4. Performance requirements
  • GOST R IEC 60238-99 Edison screw lampholders
  • GOST R IEC 60081-99 Double-capped fluorescent lamps. Performance specifications
  • GOST R IEC 61184-99 Bayonet lampholders
  • GOST R IEC 60173-99 Colours of the cores of flexible cables and cords
  • GOST R IEC 60335-2-26-99 Safety of household and similar electrical appliances. Particular requirements for clocks
  • GOST R IEC 60155-99 Glow-starters for fluorescent lamps
  • GOST R IEC 878-95 Graphical symbols electrical equipment in medical practice
  • GOST R IEC 60227-2-99 Polyvinylchloride insulated cables of rated voltages up to and including 450/750 V. Part 2. Test methods
  • GOST R IEC 870-3-93 Telecontrol equipment and system. Part 3. Interfaces (electrical characteristics)
  • GOST R ISO/IEC 10021-1-98 Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Part 1. System and service overview
  • GOST R ISO/IEC 10021-3-98 Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Part 3. Abstract service definition conventions
  • GOST R ISO/IEC 9594-5-98 Information technology. Open Systems Interconnection. The directory. Part 5. Protocol specifications
  • GOST R IEC 598-2-10-98 Luminaries. Part 2. Particular requirements. Section 10. Portable child appealing luminaires
  • GOST R IEC 598-2-20-97 Luminaires. Part 2. Particular requirements. Section 20. Lighting chains
  • GOST R IEC 598-2-1-97 Luminaires. Part 2. Particular requirements. Section 1. Fixed general-purpose luminaires
  • GOST IEC 730-2-1-95 Automatic electrical controls for household and similar use. Particular requirements for electrical controls for electrical household appliances and test methods
  • GOST R IEC 60245-7-97 Rubber insulated cables of rated voltages to 450/750 V including. Heat-resistant ethylene-vinyl acetate rubber insulated cables
  • GOST R IEC 60245-6-97 Rubber insulated cables of rated voltages to 450/750 V including. Arc welding electrode cables
  • GOST R IEC 245-5-97 Rubber insulated cables of rated voltages to 450/750 V including. Lift cables
  • GOST R IEC 60245-3-97 Rubber insulated cables of rated voltages to 450/750 V including. Heat resistant silicone insulated cables
  • GOST R IEC 773-96 Brushes for electrical machines. Test methods and apparatus for the measurement of the operational characteristics
  • GOST R IEC 1029-2-5-96 Electric transportable tools. Particular safety requirements and methods of band saws tests
  • GOST R ISO/IEC 8631-94 Information technology. Program constructs and conventions for their representation
  • GOST R IEC 870-1-1-93 Telecontrol equipment and systems. Part 1. General considerations. Section One - General prinсiples
  • GOST R IEC 952-1-93 Aircraft battaries. Part 1. General test requirements and performance levels
  • GOST R IEC 794-1-93 Optical fibre cables. General specifications
  • GOST R IEC 60598-2-22-99 Luminaries. Part 2-22. Particular requirements. Luminaries for emergency lighting
  • GOST R IEC 60400-99 Lampholders for tubular fluorescent lamps and starterholders
  • GOST R IEC 60598-2-5-99 Luminaries. Part 2. Particular requirements. Section 5. Floodlights
  • GOST R IEC 60335-2-56-99 Safety of household and similar electrical appliances. Particular requirements for projectors and similar appliances
  • GOST R IEC 60598-2-3-99 Luminaires. Part 2. Particular requirements. Section 3. Luminaires for street and road lighting
  • GOST R IEC 60598-2-2-99 Luminaires. Part 2. Particular requirements. Section 2. Recessed luminaires
  • GOST R IEC 60598-2-4-99 Luminaires. Part 2. Particular requirements. Section 4. Portable gengral-purpose luminaires
  • GOST R IEC 61199-99 Single - capped fluorescent lamps. Safety specifications
  • GOST R IEC 60719-99 Calculation of the lower and upper limits for the average outer dimensions of cables with circular coper conductors and of rated voltages up to and including 450/750 V
  • GOST R IEC 870-1-2-95 Telecontrol equipment and systems. Part 1. General considerations. Section 2. Guide for specifications
  • GOST R IEC 60227-7-98 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 7. Screened and unscreened flexible cables with two or more conductors
  • GOST R IEC 60811-3-1-94 Test methods specific to PVC insulating and sheathing compaunds of electric and optical cables. Pressure test at high temperature. Test for resistance to cracking
  • GOST R IEC 598-2-9-98 Luminaires. Part 2. Particular requirements. Section 9. Photo and film luminaires (non-professional)
  • GOST R ISO/IEC 9594-6-98 Information technology. Open systems Interconnection. The directory. Part 6. Selected attribute types
  • GOST R ISO/IEC 8881-98 Information processing system. Data communication. Use of the X.25 packet level protocol in local area networks
  • GOST R ISO/IEC 9067-98 Information technology. Data communication. Automatic fault isolation procedures using test loops
  • GOST R IEC 929-98 Auxiliaries for lamps. A.c.-Supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
  • GOST R IEC 870-1-4-98 Telecontrol equipment and systems. Part 1. General considerations. Section 4. Basic aspects of telecontrol data transmission and organization of standards IEC 870-5 and IEC 870-6
  • GOST R IEC 925-98 D.c. supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
  • GOST R IEC 927-98 Auxiliaries for lamps. Starting devices (other than glow starters). Performance requirements
  • GOST R IEC 60598-2-18-98 Luminaires. Part 2. Particular requirements. Section 18. Luminaires for swimming pools and similar applications
  • GOST R IEC 60598-2-23-98 Luminaires. Part 2. Particular requirements. Section 23. Extra low voltage lighting systems for filament lamps
  • GOST R IEC 598-2-6-98 Luminaries. Part 2. Particular requirements. Section 6. Luminaries with built-in transformers for filament lamps
  • GOST R IEC 598-2-7-98 Luminaries. Part 2. Particular requirements. Section 7. Portable luminaries for garden use
  • GOST R IEC 60922-98 Auxiliaries for lamps-ballasts for discharge lamps (excluding tubular fluorescent lamps) - general and safety requirements

  • GOST R IEC 598-2-19-97 Luminaires. Part 2. Particular requirements. Section 19. Air-handling luminaires. Safety requirements
  • GOST R IEC 598-2-17-97 Luminaires. Part 2. Particular requirements. Section 17. Luminaires for indoor and outdoor lighting of stages, television, film and photographic studios
  • GOST R IEC 86-2-96 Primary batteries. Part 2. Specification sheets
  • GOST R IEC 1007-96 Transformers and inductors for use in electronic and telecommuncation equipment. Measuring methods and test procedures
  • GOST R IEC 449-96 Electrical installations of buildings. Voltage bands
  • GOST R IEC 1029-2-6-96 Electric transportable tools. Particular safety requirements and methods of diamond drills with water supply tests
  • GOST R ISO/IEC 10729-2-99 Information technology. Open systems interconnection. Conformance test suite for the presentation layer. Part 2. Test suite structure and test purposes for the ASN.1 basic encodings
  • GOST R ISO/IEC 7498-1-99 Information technology. Open systems interconnection. Basic reference model. Part 1. The basic model
  • GOST R IEC 60811-1-1-98 General test methods for insulating and sheathing materials of electric and optical cables. Measurements of thickness and overall dimensions. Tests for determining the mechanical properties
  • GOST R IEC 1029-2-3-96 Electric transportable tools. Particular safety requirements and test methods of planers and thicknessers
  • GOST R ISO/IEC TR 10023-93 Information technology. Telecommunications and Information exchange. Between systems. Formal description of 8072 in LOTOS
  • GOST R ISO/IEC 9066-1-93 Information processing systems. Text communication. Reliable transfer. Part 1. Model and service definition
  • GOST R IEC 1066-93 Thermoluminescene dosimetry systems for personal and environmental monitoring. General technical requirements and test methods
  • GOST R IEC 60811-3-2-94 Methods specific to PVC compaunds of insulating and sheathing materials of electric cables. Loss of mass test. Thermal stability test
  • GOST R ISO/IEC 9549-93 Information technology. Galvanic isolation of balanced interchange circuits
  • GOST R IEC 896-1-95 Stationary lead-acid batteries. General requirements and methods of test. Part 1. Vented types
  • GOST R ISO/IEC 6937-93 Information technology. Coded graphic character set for text communication. Latin alphabet
  • GOST R ISO/IEC ISP 10607-1-94 Information technology. International standardized profiles AFTnn. File transfer, access and management. Part 1. Specification of ACSE, presentation and session protocols for use by FTAM
  • GOST R IEC 952-2-93 Aircraft battaries. Part 2. Design and construction requirements
  • GOST R IEC 1029-2-4-96 Electric transportable tools. Particular safety requirements and test methods of bench grinders
  • GOST R IEC 1029-2-1-95 Electrical transportable tools. Specific safety requirements and methods of circular saws testing
  • GOST R ISO/IEC 10038-99 Information technology. Telecommunications and information exchange between systems. Local area networks. Media access control (MAC) bridges
  • GOST R IEC 60570-2-1-99 Electrical supply track systems for lum inaires. Part 2. Mixed supply systems. Section 1. Classes I and III
  • GOST R IEC 60598-2-24-99 Luminaries. Part 2-24. Particular requirements. Luminaries with limited surface temperatures
  • GOST R ISO/IEC 10164-2-99 Information technology. Open systems interconnection. Systems management. State management function
  • GOST R ISO/IEC 10164-1-99 Information technology. Open systems interconnection. Systems management. Object management function
  • GOST R ISO/IEC ISP 11185-10-99 Information technology. International Standardized. Profiles FVT2nn. Virtual Terminal Basic Class. Register of control object type definitions. Part 10. FVT231. Forms FEPCO (Field Entry Pilot Control Object) No.1
  • GOST R IEC 61195-99 Double-capped fluorescent lamps. Safety specifications
  • GOST R ISO/IEC 7498-4-99 Information technology. Open systems interconnection. Basic reference model. Part 4. Management framework
  • GOST R IEC 870-5-3-95 Telecontrol equipment and systems. Part 5. Transmission protocols. Section 3. General structure of application data
  • GOST R IEC 870-5-1-95 Telecontrol equipment and systems. Part 5. Transmission protocols. Section 1. Transmission frame formats
  • GOST R IEC 1029-2-2-95 Electrical transportable tools. Particular safety requirements and methods of radial arm saws
  • GOST R ISO/IEC ISP 10607-2-94 Information technology. International standardized profiles AFTnn. File transfer access and management. Part 2. Definition of document types, constraint sets and syntaxes
  • GOST R ISO/IEC ISP 10613-1-98 Information technology. International Standardized profile RA. Relaying the connectionless-mode network service. Part 1. Relay function general overview and subnetwork-independent requirements
  • GOST R IEC 1047-98 Auxiliaries for lamps. d.c. or a.c. supplied electronic step-down converters for filament lamps. Performance requirements
  • GOST R ISO/IEC 9594-7-98 Information technology. Open systems interconnection. The directory. Part 7. Selected object classes
  • GOST R ISO/IEC 2593-98 Information technology. Telecommunications and information exchange between systems. 34-pole DTE/DCE interface connector. Mateability dimension and contact number assignments
  • GOST R ISO/IEC TR 10178-98 Information technology. Telecommunications and information exchange between systems. The structure and coding of logical link control addresses in local area networks
  • GOST R IEC 924-98 D.c. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
  • GOST R IEC 870-6-1-98 Telecontrol equipment and systems. Part 6. Telecontrol protocols compatible with ISO standards and ITU-T recommendations. Section 1. Application context and organization of standards
  • GOST R IEC 923-98 Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements
  • GOST R ISO/IEC 10021-7-97 Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Part 7. Interpersonal messaging system
  • GOST R IEC 811-5-1-95 Test methods specific to filling compounds of electric cables. Drop-point. Separation of oil. Lower temperature brittleness. Total acid number. Absence of corrosive components. Permittivity at temperature 23 °C. D.c. resistivity at temperature 23 °C and 100 °C
  • GOST R IEC 598-2-8-97 Luminaires. Part 2. Particular requirements. Section 8. Hand lamps
  • GOST R IEC 1029-2-7-96 Electric transportable tools. Particular safety requirements and methods of diamond saws with water supply tests
  • GOST R IEC 141-1-96 Tests on oil-filled paper-insulated metal-sheathed cables and accessories for alternating voltages up to and including 400 kV
  • GOST R IEC 906-3-96 IEC System of plugs and socket-outlets for household and similar purposes. Particular requirements for SELV plugs and sockets 6, 12, 24, 48 V, a. c. and d. c., 16 A. Technical requirements

  • GOST R ISO/IEC 10177-99 Information technology. Telecommunications and information exchange between systems. Provision of the connection-mode Network internal layer service by intermediate systems using ISO/IEC 8208, the X.25 packet layer protocol
  • GOST R ISO/IEC ISP 11185-9-99 Information technology. International standardized. Profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. Part 9. FVT222 - Paged FEICO ( Field entry instruction control object) No.1
  • GOST R IEC 1029-2-9-99 Electric transportable tools. Particular safety requirements and methods of testing mitre saws
  • GOST R ISO/IEC 9066-2-93 Information processing systems. Text communication. Reliable transfer. Part 2. Protocol specification
  • GOST R IEC 371-3-1-93 Insulating mica materials for commutator separators. Specifications
  • GOST R ISO/IEC 8825-93 Information technology. Open Systems Interconneсtion. Specification of Basic Encoding Rules for Abstract Syntax Notation One (ASN.1)
  • GOST R ISO/IEC 10027-93 Information technology. Information resource dictionary system (IRDS) framework
  • GOST R IEC 870-5-2-95 Telecontrol equipment and systems. Part 5. Transmission protocols. Section 2. Link transmission procedures
  • GOST R IEC 1020-5-1-94 Electromechanical switches for use in electronic equipment. Blank detail specification for pushbutton switches
  • GOST R ISO/IEC 9646-4-93 Information technology. Open systems interconnection. Conformance testing methodology and framewark. Part 4. Test realization
  • GOST R ISO/IEC 10169-1-99 Information technology. Open systems interconnection. Conformance test suite for the ACSE protocol. Part 1. Test suit structure and test purposes
  • GOST R IEC 60570-99 Electrical supply track systems for luminaires
  • GOST R ISO/IEC ISP 11185-11-99 Information technology. International Standardized Profiles FVT2nn. Virtual Terminal Basic Class. Register of control object type definitions. Part 11. FVT232. Paged FEPCO (Field Entry Pilot Control Object) No.1
  • GOST R IEC 61050-99 Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers). General and safety requirements
  • GOST R ISO/IEC 8877-99 Information technology. Telecommunications and information exchange between systems. Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T
  • GOST R IEC 1020-6-1-94 Electromechanical switches for use in electronic equipment. Blаnk detail specification for sensitive switches
  • GOST R IEC 928-98 Auxiliaries for lamps. A.c.-supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
  • GOST R ISO/IEC 9072-2-93 Information processing systems. Text communication. Remote operations. Part 2. Protocol specification
  • GOST R IEC 730-2-10-96 Automatic electrical controls for household and similar use. Particular requirements for electrically operated motor starting relays test methods
  • GOST R ISO/IEC ISP 10611-2-95 Information technology. International standardized profiles AMH1n. Message handling systems. Common messaging. Part 2. Specification of ROSE, RTSE, ACSE, presentation and session protocols for use by MHS
  • GOST R ISO/IEC ISP 10609-11-98 Information technology. International Standardized Profiles TB, TC, TD and TE. Connection-mode Transport Service over connection-mode Network Service. Part 11. CSMA/CD subnetwork-dependent, media-dependent requirements
  • GOST R ISO/IEC ISP 10609-10-98 Information technology. International standardized. profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 10. LAN subnetwork-dependent, media-independent requirements
  • GOST R ISO/IEC ISP 10613-8-98 Information technology. International standardized Profile RA. Relaying the connectionless-mode network service. Part 8. Profile RA51.1111
  • GOST R ISO/IEC ISP 10613-5-98 Information technology. International standardized profile RA. Relaying the connectionless-mode network service. Part 5. Definition of profile RA51.51, relaying the connectionless-mode network service between CSMA/CD LAN subnetworks
  • GOST R ISO/IEC 10021-2-98 Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Part 2. Overall architecture
  • GOST R IEC 60335-2-70-98 Safety of household and similar electrical appliances. Particular requirements for milking machines and test methods
  • GOST R ISO/IEC 9594-8-98 Information technology. Open systems interconnection. The directory. Part 8. Authentication framework
  • GOST R ISO/IEC 9594-1-98 Information technology. Open Systems Interconnection. The directory. Part 1. Overview of concepts, models and services
  • GOST R ISO/IEC TR 10171-98 Information technology. Telecommunication and information exchange between system. List of standard data link layer protocols that utilize high-level data link control (HDLC) classes of procedures and list of standardized XID format identifiers and private parameter set identification values
  • GOST R IEC 926-98 Auxiliaries for lamps. Starting devices (other than glow starters). General and safety requirements
  • GOST R IEC 598-2-25-98 Luminaires. Part 2. Particular requirements. Section 25. Luminaries for use in clinical areas of hospitals and health care buildings
  • GOST R ISO/IEC 10021-6-97 Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Part 6. Protocol specifications
  • GOST R IEC 921-97 Ballasts for tubular fluorescent lamps. Performance requirements
  • GOST R IEC 998-2-4-96 Connecting devices for low-voltage circuis for household and similar purposes. Particular requirements for twist-on connecting devices
  • GOST R ISO/IEC 8072-96 Information technology. Open Systems Interconnection. Transport service definition
  • GOST R ISO/IEC 10021-5-96 Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Part 5. Message store. Abstract service definition
  • GOST R ISO/IEC 10729-1-99 Information technology. Open systems interconnection. Conformance test suite for the presentation layer. Part 1. Test suite structure and test purposes for the presentation protocol
  • GOST R IEC 127-6-99 Miniature fuses. Part 6. Fuse-holders for miniature cartridge fuse-links
  • GOST R ISO/IEC 3309-98 Information technology. Telecommunications and information exchange between systems. High-level data link control (HDLC) procedures. Frame structure
  • GOST R ISO/IEC 10116-93 Information technology. Modes of operation for an n-bit block cipher algorithm
  • GOST R IEC 958-93 Digital audio interface
  • GOST R IEC 1020-3-1-94 Electromechanical switches for use in electronic equipment. Blank detail specification for in-line package switches
  • GOST R IEC 60432-2-99 Safety specifications for incandescent lamps. Part 2. Tungsten halogen lamps for domestic and similar general lighting purposes
  • GOST R ISO/IEC TR 10172-99 Information technology. Telecommunications and information exchange between systems. Network/ transport protocol interworking specification
  • GOST R ISO/IEC 10732-99 Information technology. Use of X. 25 packet layer protocol to provide the OSI connection-mode Network Service over the telephone network
  • GOST R ISO/IEC 8831-99 Information technology. Open systems interconnection. Job transfer and manipulation concepts and services

  • GOST R ISO/IEC 10588-99 Information technology. Use of X.25 packet layer protocol in conjunction with X.21/X.21bis to provide the OSI connection-mode Network Service
  • GOST R ISO/IEC 9595-99 Information technology. Open systems interconnection.Common management information service definition
  • GOST R ISO/IEC TR 9294-93 Information technology. Guidelines for the management of software documentation
  • GOST R ISO/IEC 9072-1-93 Information processing systems. Text communication. Remote operations. Part 1. Model, notation and service definition
  • GOST R ISO/IEC 10857-95 Information technology. Microprocessor systems. Futurebus+. Logical protocol specification
  • GOST R IEC 536-94 Classification of electrical and electronic equipment with regard to protection against electric shock
  • GOST R IEC 491-95 Safety requirements for electronic flash apparatus for photographic purposes
  • GOST R ISO/IEC ISP 10608-2-95 Information technology. International standardized profile TAnnnn. Connection-mode transport service over connectionless-mode network service. Part 2. TA51 profile including subnetwork-dependent requirements for CSMA/CD local area networks (LAN)
  • GOST R ISO/IEC 9574-93 Information technology. Telecommunications and information exchange between systems. Provision of the OSI connection-mode network service by packet mode terminal equipment connected to an integrated services digital network (ISDN)
  • GOST R ISO/IEC ISP 10609-5-95 Information technology. International standardized. Profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 5. Definition of profiles TB1111/TB1121
  • GOST R ISO/IEC ISP 10611-4-95 Information technology. International standardized profiles AMH1n. Message handling systems. Common messaging. Part 4. AMH12-MTS access (P3)
  • GOST R IEC 60335-2-71-98 Safety of household and similar electrical appliances. Particular requirements for electrical heating appliances for breeding and rearing animals and test methods
  • GOST R ISO/IEC ISP 10609-12-98 Information technology. International standardized. Profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 12. Definition of profile TC51, provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end-system attached to a CSMA/CD LAN
  • GOST R ISO/IEC ISP 10613-9-98 Information on technology. International stanlardized profile RA. Relaying the connectionless-mode network service. Part 9. Definition of profile RA51.1121, relaying the connectionless-mode network between CSMA/CD LAN subnetworks and PSDNs virtual calls over a digital data circuit/CSDN leased line permanent access
  • GOST R ISO/IEC ISP 10613-7-98 Information technology. International standardized. Profile RA. Relaying the connectionless-mode network service. Part 7. PSDN subnetwork-dependent, media-dependent requirements for virtual calls over a permanent access
  • GOST R ISO/IEC ISP 10613-3-98 Information technology. International standardized profile RA. Relaying the connectionless-mode network service. Part 3. CSMA/CD LAN subnetwork-dependent, media-dependent requirements
  • GOST R ISO/IEC ISP 10613-2-98 Information technology. International standardized profile RA. Relaying the connectionless-mode network service. Part 2. LAN subnetwork-dependent media-independent requirements
  • GOST R IEC 1046-98 Auxiliaries for lamps. D.c. or a.c. supplied electronic step-down converters for filament lamps. General and safety requirements
  • GOST R ISO/IEC 7480-98 Information technology. Telecommunications and information exchange between systems. Start-stop transmission signal quality at DTE/DCE interfaces
  • GOST R ISO/IEC ISP 10611-5-98 Information technology. International standard. Profiles AMH1n. Message handling system. Common messaging. Part 5. Profile AMH13. MS access (P7)
  • GOST R IEC 920-97 Ballasts for tubular fluorescent lamps. General and safety requirements
  • GOST R IEC 332-2-96 Tests on cables under fire conditions. Test on a single small vertical insulated copper wire or cable
  • GOST R ISO/IEC 10030-96 Information technology. Telecommunications and information exchange between systems. End system routeing information exchange protocol for use in conjunction with ISO 8878
  • GOST R ISO/IEC 10028-96 Information technology. Telecommunications and information exchange between systems. Definition of the relaying functions of a Network layer intermediate system
  • GOST R ISO/IEC ISP 10609-8-95 Information technology. International standardized. Profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 8. Definition of profiles TE1111/TE1121
  • GOST R ISO/IEC ISP 10609-6-95 Information technology. International standardized. Profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 6. Definition of profiles TC1111/TC1121
  • GOST R ISO/IEC ISP 10609-7-95 Information technology. International standardized. Profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 7. Definition of profiles TD1111/TD1121
  • GOST R ISO/IEC 9126-93 Information technology. Software product evaluation. Quality characteristics and guidelines for their use
  • GOST R ISO/IEC 9075-93 Information processing systems. Database language SQL with Integrity Enhancement
  • GOST R ISO/IEC ISP 10609-14-98 Information technology. International standardized. Profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 14. Definition of profile TC53, provision of the OSI connection-mode transport service using the OSI connection-mode network service in an end system attached to a token ring LAN
  • GOST R ISO/IEC ISP 10608-1-95 Information technology. International standardized profile TAnnnn. Connection-mode transport service over connectionless-mode network service. Part 1. General overview and subnetwork-type independent requirements
  • GOST R ISO/IEC 8824-93 Information technology. Open systems interconnection. Specification abstract syntax notation one (ASN.1)
  • GOST R ISO/IEC 10040-99 Information technology. Open systems interconnection. Systems management overview
  • GOST R IEC 335-2-61-94 Safety of household and similar electrical appliances. Particular requirements for thermal storage room heaters and test methods
  • GOST R IEC 332-1-96 Test on cables under fire conditions. Test on a single vertical insulated wire or cable
  • GOST R ISO/IEC ISP 10611-3-95 Information technology. International standardized profiles AMH1n. Message handling systems. Common messaging. Part 3. AMH11. Message transfer (P1)
  • GOST R IEC 491-95 Safety requirements for electronic flash apparatus for photographic purposes
  • GOST R ISO/IEC ISP 10609-1-95 Information technology. International standardized. Profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 1. Subnetwork-type independent requirements for group TB
  • GOST R ISO/IEC ISP 10609-2-95 Information technology. International standardized. Profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 2. Subnetwork-type independent requirements for group TC
  • GOST R ISO/IEC 11570-94 Information technology. Telecommunications and information exchange between systems. Open systems interconnection. Transport protocol identification mechanism
  • GOST R IEC 870-5-4-96 Telecontrol equipment and systems. Part 5. Transmission protocols. Section 4. Definition and coding of application information elements
  • GOST R ISO/IEC 9545-98 Information technology. Open systems interconnection. Application layer structure

  • GOST R ISO/IEC 8885-98 Information technology. Telecommunications and information exchange between systems. High-level data link control (HDLC) procedures. General purpose XID frame information field content and format
  • GOST R ISO/IEC ISP 11185-7-98 Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. Part 7. FVT2110 - entry control object
  • GOST R ISO/IEC ISP 11185-3-98 Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. Part 3. FVT215, FVT216 - application RIO record loading control object. Terminal RIO record notification control object
  • GOST R ISO/IEC ISP 11185-2-98 Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. Part 2. FVT213, FVT214 - sequenced and unsequenced terminal control objects
  • GOST R ISO/IEC ISP 11185-8-98 Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. Part 8. FVT221 - forms FEICO (field entry instruction control object) №1
  • GOST R ISO/IEC ISP 11185-1-98 Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. Part 1. FVT211, FVT212 - sequenced and unsequenced application control objects
  • GOST R ISO/IEC ISP 11185-4-98 Information technology. International standardized. profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. Part 4. FVT217 - horizontal tabulation control object
  • GOST R ISO/IEC ISP 10608-5-95 Information techhnology. International standardized profile TAnnnn. Connection-mode transport service over sonnectionless-mode network service. Part 5. TA1111/TA1121 profiles including subnetwork-type dependent requirements for X.25 packet-switched data networks using virtual calls
  • GOST R ISO/IEC ISP 10609-4-95 Information technology. International standardized. Profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 4. Subnetwork-type independent requirements for group TE
  • GOST R IEC 1029-1-94 Transrportable motor-operated electric tools. General safety requirements and testing methods
  • GOST R ISO/IEC ISP 10609-3-95 Information technology. International standardized. Profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 3. Subnetwork-type independent requirements for group TD
  • GOST R ISO/IEC 9646-2-93 Information technology. Open systems interconnection. Conformance testing methodology and framework. Part 2. Abstract test suite specification
  • GOST R ISO/IEC ISP 10609-9-95 Information technology. International standardized. Profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network service. Part 9. Subnetwork-type dependent requirements for network layer, data link layer and physical layer concerning permanent access to a packet swiched data network using virtual calls
  • GOST R ISO/IEC 9646-5-93 Information technology. Open systems interconnection. Conformance testing methodology and framework. Part 5. Requirements on test laboratories and clients for the conformance assessment process
  • GOST R ISO/IEC 9804-96 Information processing systems. Open systems interconnection. Service definition for the commitment. Councurrency and recovery service element
  • GOST R IEC 870-5-5-96 Telecontrol equipment and systems. Part 5. Transmission protocols. Section 5. Basic application on functions
  • GOST R ISO/IEC ISP 11185-6-98 Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. Part 6. FVT219 - status message control object
  • GOST R ISO/IEC ISP 11185-5-98 Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. Part 5. FVT218 - logical image control object
  • GOST R IEC 335-1-94 Safety of household and similar electrical appliances. General requirements and test methods
  • GOST R ISO/IEC 10025-3-94 Information technology. Telecommunications and information exchange between systems. Transport conformance testing for connection-mode transport protocol operating over connection-mode network service. Part 3. Transport test management protoсol specification
  • GOST R IEC 730-2-1-94 Automatic electrical controls for household and similar use. Particular requirements for electrical controls for electrical household appliances and test methods
  • GOST R ISO/IEC 8073-96 Information technology. Telecommunications and information exchange between systems. Open Systems Interconnection. Protocol for providing the connection-mode transport service
  • GOST R ISO/IEC 7809-98 Information technology. Telecommunications and information exchange between systems. High-level data link control (HDLC) procedures. Classes of procedures
  • GOST R ISO/IEC ISP 10611-1-95 Information technology. International standardized profiles AMH1n. Message handling systems. Common messaging. Part 1. MHS service support
  • GOST R ISO/IEC ISP 10607-6-94 Information technology. International standardized profiles AFTnn. File transfer access and management. Part 6. AFT3 - file management service
  • GOST R ISO/IEC 9646-1-93 Information technology. Open systems interconnection. Conformance testing methodology and framework. Part 1. General concepts
  • GOST R IEC 730-1-94 Automatic electrical controls for household and similar use. General requirements and test methods
  • GOST R ISO/IEC ISP 10607-3-94 Information technology. International standardized profiles AFTnn. File transfer access and management. Part 3. AFT11 - simple file transfer service (unstructured)
  • GOST R ISO/IEC ISP 10607-5-94 Information technology. International standardized profiles AFTnn. File transfer access and management. Part 5. AFT22 - positional file access service (flat)